What to do if COOK Medical Rhapsody H-30 shows an over temperature error?
If your COOK Medical Medical Equipment displays an over-temperature warning, try the following: 1. Lower the room temperature. 2. Make sure nothing is blocking the fan.
What causes a 'Remote Open' error on COOK Medical Rhapsody H-30?
If the remote is open on your COOK Medical Medical Equipment, it could be due to: * The remote interlock not being connected or being open. In this case, check the remote interlock connection. * The remote interlock being damaged. In this case, call for service.
What to do if COOK Medical Rhapsody H-30 says 'Pedal not connected'?
If your COOK Medical Medical Equipment displays 'Pedal not connected', ensure the foot switch is properly connected. If the issue persists, call for service, as the foot switch may be damaged.
Why is my COOK Medical Medical Equipment showing a 'Low coolant fol w' error?
If you see 'Low coolant fol w' on your COOK Medical Medical Equipment, it means there is not enough water. Fill the water reservoir to resolve this.
General| Device Category | Medical Equipment |
|---|---|
| Device Name | COOK Medical Rhapsody H-30 |
| Device Type | Balloon Catheter |
| Guidewire Compatibility | 0.035 inch |
| Sterility | Sterile |
| Single Use | Yes |
| Balloon Length | 40 mm |
To Next Page
