How to Pair for the First Time
1. Go to "Settings" on your iPhone/iPod/Android or another mobile device.
2. Select Bluetooth. Confirm the Bluetooth function is on and search/scan for
available devices.
3. Tap CarPro to pair. Enter four zeros, "0000" as the PIN—tap pair to
complete the connection.
4. The mobile device is paired with the CoolStream CarPro when a steady blue
LED light is displayed.
5. Play music. Confirm that the volume on your mobile device is at
MAXIMUM.
Find the correct setting for your stereo
Refer to your vehicle's manual for accessing your stereo's auxiliary or iPod function to
choose the correct setting.
How to Play Music
You must have at least one song saved to your phone's music library for the CarPro
to complete the connection between your phone and the car stereo. Without this song,
you can still pair to the CarPro, but your music will not play through to the car
speakers. For more information and specific steps on purchasing a song, please read this
FAQ.
The CarPro will stream music from your phone's music library or any streaming app such
as Apple Music, Spotify, Audible, etc.
How to Re-Connect
1. The CoolStream CarPro can be left on the 30 Pin iPod Cable all the time.
2. Once you turn off the car, the CoolStream CarPro should turn off, and the
Bluetooth connection with your mobile device will be broken.
3. After turning on the car again, the CoolStream CarPro will automatically
power on and re-connect to the last mobile device paired to it. The
CoolStream CarPro displays a steady blue LED light when re-connected.
To Next Page
Loading...