EasyManua.ls Logo

Cooper Lighting MS100PG - Page 3

Cooper Lighting MS100PG
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Call for customer service and/or missing or damaged parts (800-334-6871)
3
Use only three-wire outdoor extension cords that have three-prong grounding plugs
and grounding receptacles that accept the applianceʼs plug.
Ground Fault Circuit Interrupter (GFCI) protection should be provided on the
circuit(s) or outlet(s) to be used for the wet location portable lamp. Receptacles
are available having built-in GFCI protection and are able to be used for this
measure of safety.
Use only with an extension cord for outdoor use, such as an extension cord type
SW, SW-A, SOW, SOW-A, STW, STW-A, STOW, STOW-A, SJW, SJW-A, SJOW,
SJOW-A, SJTW, SJTW-A, SJTOW, SJTOW-A.
Turn off/unplug and allow to cool before replacing bulb (lamp).
Bulb (lamp) gets HOT quickly! Only contact switch/plug when turning on.
Do not touch hot lens, guard or enclosure.
Do not remain in light if skin feels warm.
Do not look directly at lighted lamp.
Keep away from materials that may burn.
Use only with a 100 watt, T-3 halogen bulb. Installing a bulb of a higher wattage
could create a fire hazard. Use of a higher wattage bulb will void the warranty.
Do not touch the bulb (lamp) at any time. Use a soft cloth. Oil from skin may
damage bulb (lamp).
Do not operate the portable luminaire with a missing or damaged guard, lamp
containment barrier (lens) or UV filter.
If lens is replaced, use only tempered safety glass of equal thickness.
c-CSA-us Listed for wet location use.
Wall mount only.
Mount fixture vertically, not horizontally (Fig. 4).
For proper operation and protection against damage, the motion sensor
head adjustment knobs must be facing the ground.
Keep fixture at least 16 feet from pools and spas.
Keep plugs and receptacles dry.
For use only on GFCI protected circuits.
Keep away from flammable objects. Do not mount body of fixture
within one inch of any combustible material.
For maximum bulb life, position fixture so the quartz halogen bulb remains
within 4 degrees of horizontal.
Disassembly of your fixture will void the warranty.
SAVE THESE INSTRUCTIONS.

Related product manuals