Need help?Do you have a question about the Cooper Tools Quackenbush 158QGDA-RAD-SU-RS and is the answer not in the manual?
General| Category | Drill |
|---|---|
| Tool Model | 158QGDA-RAD-SU-RS |
| Manufacturer | Cooper Tools Quackenbush |
| Flute Type | Spiral |
| Shank Size | 1/4 inch |
| Material | High Speed Steel |
Safety guidelines for eye and hearing protection during operation.
Key safety advice for drill operation, including air pressure and bit handling.
Warnings against loose clothing and jewelry to prevent entanglement hazards.
Importance of maintaining legibility and replacing warning labels on tools.
Precautions for handling the spindle and avoiding entrapment hazards.
Advice on preventing cumulative trauma disorders from repetitive work motions.
How to start, vary speed, and engage the feed mechanism of the drill.
Guidelines for tool lubrication and proper storage procedures.
Initial steps for disassembling the tool, including removing tubing and the drill head.
Steps to disassemble power unit gear train and motor components.
Procedures for disassembling drill head components and housing.
Guidelines for reassembling the tool in reverse order of disassembly.
Instructions for reassembling motor unit and power unit gear train components.
Steps for installing spindle, setting gears, and adjusting drill head components.
Catalog of part numbers and lengths for solid spindle guards.
Catalog of part numbers and lengths for fluid spindle guards and positioning shims.
Table detailing feed per revolution, spindle gear, and teeth counts.
Lists conversion kit numbers and components for changing models.
Chart for power units and governors covering specific RPM ranges.
Chart for power units and governors covering specific RPM ranges.
Chart for power units and governors covering specific RPM ranges.
Chart for power units and governors covering specific RPM ranges.
Lists part numbers associated with specific feed rates for subassemblies.
Detailed list of parts for power units across various spindle RPM ranges.
Exploded view and list of components for the hand feed conversion kit.
To Next Page