How to use the attachments
10. Round brush – simply align the hexagonal fitting with the hexagonal head on the spray nozzle and push into place. Ideal for helping to
remove tough dirt.
11. Angled nozzle - simply align the hexagonal fitting with the hexagonal head on the spray nozzle and push into place. Ideal for helping to
reach dirt in hard to reach areas.
12. Extension nozzle – align the arrow on the spray nozzle with the single line marking on the main body, push on firmly and turn to align the
arrow with the double line mark.
13. Flexible Extension nozzle – align the arrow on the spray nozzle with the single line marking on the main body, push on firmly and turn to
align the arrow with the double line mark.
14. Clothing & Upholstery cleaner - align the arrow on the spray nozzle with the single line marking on the main body, push on firmly and turn
to align the arrow with the double line mark. Cover head with microfibre cloth. Ideal for cleaning, removing creases and neutralising
odours from clothes and upholstery. Always do an inconspicuous patch test before use.
15. Glass cleaner – align clips with catches on the clothing & upholstery cleaner (13). Secure using the front clip. Comes with built in squeegee
for use on glass, windows and mirrors.
Hand Steam Cleaner
8114
instructions
Head Office, 11 Bridge Street, Bishop’s Stortford CM23 2JU
Tel: 0844 482 4400 Fax: 01279 756595 www.coopersofstortford.co.uk
Technical Specification
Rating of power supply: AC220V~, 50Hz, with earthed jack and allowed
rated line load current is greater than 5A.
Tank capacity: 175ml to 300ml maximum (fill to 175ml only to
allow for steam)
Rated power: 900W
Steam pressure: 2.5~4.2bar
Injected steam capacity: 28g/min
Temperature controller: functioning temperature: 135°C;
fuser: functioning temperature: 169°C
Net weight: 1.85kg
To Previous Page
Loading...