COP-USA CM15 User Manual

Image Sensor
1/4" interline transfer CCD
Pixel count
NTSC: 250k PAL:296.8k
Picture Elements EIA/NTSC 510H x 492V CCIR/PAL 500H x 582V
Horizontal Frequency
EIA/NTSC 15.734kHz CCIR/PAL 15.625Khz
Vertical Frequency EIA/NTSC 60Hz CCIR/PAL 50Hz
Clock Frequency EIA/NTSC 19.0699Mhz CCIR/PAL 18.9375 Mhz
Horizontal resolution
350 Lines
Illumination
Min 1 Lux
Scanning System
2:1 Interlace
Signal to Noise ratio 50dB
Electronic Shutter Speed 1/120,000 sec
Lens
3.5mm f1.4
Video Output 1V pp 75 Ohms
Gamma
0.45
Iris Electrical drive only
Power Supply 12V DC +/- 0.5V @ 270ma
AGC
18db Max
Dimensions 17.5 x 50mm
Connectors
JST BM05B
-
SRSS
-
TB
Operating Temperatures On application
Page 1 of 1Cop Security System Corpn
7/9/2004http://www.cop-security.com/pages/15_CM15.html

COP-USA CM15 Specifications

General

Brand	COP-USA
Model	CM15
Category	Security Camera
Language	English

Summary

Specifications

Image Sensor

Details the type of image sensor used, a 1/4" interline transfer CCD.

Pixel Count

Specifies the pixel count for NTSC (250k) and PAL (296.8k) formats.

Picture Elements

Defines the resolution in picture elements for EIA/NTSC and CCIR/PAL formats.

Horizontal Frequency

Lists the horizontal scanning frequency for EIA/NTSC and CCIR/PAL systems.

Vertical Frequency

Indicates the vertical scanning frequency for EIA/NTSC and CCIR/PAL systems.

Clock Frequency

Provides the clock frequency for EIA/NTSC and CCIR/PAL video standards.

Horizontal Resolution

States the horizontal resolution capability in lines.

Illumination

Specifies the minimum illumination required for operation (Min 1 Lux).

Scanning System

Describes the scanning system used, identified as 2:1 Interlace.

Signal to Noise Ratio

Indicates the signal-to-noise ratio, measured at 50dB.

Electronic Shutter Speed

Details the electronic shutter speed, set at 1/120,000 seconds.

Lens

Specifies the lens type and aperture, a 3.5mm f1.4.

Video Output

Defines the video output signal characteristics (1V pp 75 Ohms).

Gamma

States the gamma correction value, which is 0.45.

Iris

Describes the iris control mechanism as 'Electrical drive only'.

Power Supply

Specifies the required power supply voltage and current (12V DC +/- 0.5V @ 270ma).

AGC

Indicates the Auto Gain Control (AGC) setting, with a maximum of 18db.

Dimensions

Provides the physical dimensions of the unit (17.5 x 50mm).

Connectors

Lists the type of connectors used, specifically JST BM05B-SRSS-TB.

Operating Temperatures

Defines the operating temperature condition as 'On application'.