Copper Mountain Technologies S2 Series User Manual

S2VNA and S4VNA SCPI Programming Manual
171
DISP:WIND:ANN:MARK:SING
DISPlay:WINDow <Ch> :ANNotation:MARKer:SINGle[:STATe] {OFF|ON|0|1}
DISPlay:WINDow <Ch> :ANNotation:MARKer:SINGle[:STATe]?
Description
Selects display either the active trace markers or the all trace
markers.
(command/query)
Target
Channel <Ch>,
<Ch>={[1]|2|...16}
Parameter
Choose from:
{ON|1} : Active trace markers
{OFF|0} : All trace markers
Query Response
{0|1}
Preset Value
1
Equivalent Softkeys
Markers > Properties > Active Only
DISP:WIND:MAX
DISPlay:WINDow <Ch> :MAXimize {OFF|ON|0|1}
DISPlay:WINDow <Ch> :MAXimize?
Description
Turn ON/OFF the active trace maximization inside the specified
channel.
(command/query)
Target
Channel <Ch>,
<Ch>={[1]|2|...16}
Parameter
{ON|1} : ON
{OFF|0} : OFF
Query Response
{0|1}
Preset Value
0
Equivalent Softkeys
Display > Active Trace/Channel > Maximize Trace

Copper Mountain Technologies S2 Series Specifications

General

Brand	Copper Mountain Technologies
Model	S2 Series
Category	Measuring Instruments
Language	English