RADIO TRANSMITTER AND ELE CTRIONIC EQUIPMENT REQUIRED FOR ASSEMBLY
R/C models are composed of many
precision electrical components that is
sensitive to moisture and water. Keep
away from water sources or moisture
related places.
The introduction of moisture in any form
can seriously damage the electrical parts
of the model that can cause malfunction
and premature flight patterns.
PREVENT MOISTURE KEEP AWAY FROM HEAT
R/C models are made of some parts plastic.
Make sure to store the model away from head
producing appliances such as heaters or stoves.
It is best to keep the model indoors in a
controlled cool environment with ambient room
temperature.
Transmitter
(6-channel, helicopter system)
Reciever
(6-channel, or more)
9g Micro Servo x 3 pcs.
5g Micro Servo x 1 pcv
Gyro
SCISSORS CUTER BLADE LIQUID THREAD LOCK CA GLUE BALL LINK PLIERS PITCH GUAGE
Liquid
Thread
lock
Cyano
acrylate
( CA )
NOTE : The following marks will be seen on the pages of this instruction manual. This
designates location and contact points that needs application of adhesive. Liquid thread
lock are usually used on metal to metal contact screws normally with fine pitch threading.
For Metal to plastic CA can be applied screws designated as force threading or self tapping.
2
SAFETY NOTES
TOOL REQURIED FOR ASSEMBLY
To Next Page
Loading...