Wet/Dry Filtration
Observe and make sure that the water circulation is
owing properly from the aquarium section through
the wet/dry section.
Step 1:
Water proceeds into surface and bottom intake.
Step 3:
Water ows into the overow tray, trickles down the
bio-balls and through the bio-ball strainer.
Step 2:
Water passes through lter cartridge.
Step 4:
Water goes through the sponge lter into
the water pump.
Step 5:
Water is pumped into the aquarium through the
output discharge nozzle.
PRECAUTIONS:
For optimal lter performance
1. Do not block or obstruct surface intake and
bottom intake.
2. Do not block or obstruct output discharge nozzle.
3. Perform scheduled maintenance on lter cartridge.
4. Observe scheduled maintenance on water pump.
5. Make sure to perform scheduled water changes
and BioCube ltration maintenance.
OPERATION
FIGURE 16
FIGURE 17
FIGURE 13
FIGURE 14
FIGURE 15
Surface Intake
Bottom Intake
Filter Cartridge
(Mechanical
Filtration
and Chemical
Filtration)
Bio-Balls
(Biological
Filtration)
Output
Discharge
Nozzle
Sponge Filter
(Micro-Bubble
Diffuser)
Water Pump
To Next Page
Loading...
Need help?
General