8
F:upper hinge
F:bottom hinge
9). The picture after completion is shown as below
hole cover
180°
fixed block
7)Exchange the F:bottom hinge and F:upper hinge ,then install them according to below steps,
and install the top hole cover and lower hole caps.
8) for 180°，
freezer door
Remove the two fixed blocks of freezer door and rotate them
and install them on other side of .
（The picture above is only for reference. The actual configuration will depend on
the physical product or statement by the distributor）
hole caps
Step 1 :
inst al l left bott om hinge
Step 2:
put re fr igerato r
door o n le ft bottom
hing e ve rtica ll y
Step 3 :
inst al l left uppe r hinge
To Next Page
Loading...
