How to fix WRONG PASS error on Core Health & Fitness Schwinn Z Bike?
If your Core Health & Fitness Exercise Bike displays 'WRONG PASS!', it means the passcode feature is enabled in maintenance mode, and an incorrect password was entered. To resolve this, enter the correct passcode.
What to do if my Core Health & Fitness Schwinn Z Bike displays 'NO PM!'?
If your Core Health & Fitness Exercise Bike shows 'NO PM!', it indicates that the crank is either not paired with the console or the crank battery is low. You should pair the crank to the console and check or replace the crank battery.
General| Bike Type | Upright |
|---|---|
| Weight Capacity | 350 lb (159 kg) |
| Dimensions | 51 L x 21 W x 53 H inches (130 L x 54 W x 135 H cm) |
| Q-Factor | 170 mm |
| Adjustable Seat | Yes |
| Adjustable Handlebars | Yes |
| Display | LCD |
| Display Type | LCD |
| Display Metrics | Time, speed, distance, calories, RPM |
| Seat Type | Padded |
| Flywheel Weight | 31 lb (14 kg) |
| Product Weight | 112 lb (51 kg) |
To Next Page
