Do you have a question about the Corsair CX750F and is the answer not in the manual?
Total power | 750 W |
---|---|
Input current | 10 - 5 A |
AC input voltage | 100 - 240 V |
AC input frequency | 47 - 63 Hz |
Cabling type | Fully-Modular |
PCI Express connector | Yes |
Motherboard power connector | 20-pin ATX |
Number of SATA power connectors | 8 |
PCI Express power connectors (6-pin) | 4 |
Peripheral (Molex) power connectors (4-pin) | - |
Purpose | PC |
ATX version | 2.4 |
EPS version | 2.92 |
Noise level | - dB |
80 PLUS certification | 80 PLUS Bronze |
Mean time between failures (MTBF) | 100000 h |
Power supply unit (PSU) form factor | ATX |
Cooling type | Active |
Fan diameter | 120 mm |
Product color | Black |
Harmonized System (HS) code | 84733020 |
Depth | 140 mm |
---|---|
Width | 150 mm |
Height | 86 mm |
Ensures PSU shuts down if DC outputs exceed a set level as per ATX specification.
Protects against excessive current on 3.3V, 5V, and 12V rails for safe operation.
Shuts down PSU when internal temperature reaches a critical set point due to overload or fan failure.
Protects against short circuits on 3.3V, 5V, and 12V rails to prevent damage.
Details power output, maximum load, and model information for the CX750F RGB.
Graph showing power supply efficiency (%) versus system load (%).
Graph showing fan noise (dB) versus power output (W).
Lists cables included with the CX750F RGB, detailing quantity and length.
Details power output, maximum load, and model information for the CX650F RGB.
Graph showing power supply efficiency (%) versus system load (%).
Graph showing fan noise (dB) versus power output (W).
Lists cables included with the CX650F RGB, detailing quantity and length.
Details power output, maximum load, and model information for the CX550F RGB.
Graph showing power supply efficiency (%) versus system load (%).
Graph showing fan noise (dB) versus power output (W).
Lists cables included with the CX550F RGB, detailing quantity and length.
Instructions for disconnecting and removing the old power supply unit from your system.
Instructions for connecting and installing the new power supply into your system.
Steps to connect and configure RGB lighting using iCUE software and a compatible hub.
Instructions for connecting RGB lighting to a compatible motherboard's ARGB header.
How to cycle through lighting modes and colors using the PSU's manual push-button.