3
Assembly & operation information:
Please refer to the instruction diagrams (P. 34 - 40):
Highchair
Preparation:
Seat cover
1- Fitting:
Leg
2- Fitting:
3- Opening:
Leg stopper
4- Fitting:
Foot
5- Fitting:
Front foot - The front foot has a red dot sticker at the rear.
Calf support
6- Fitting:
Backrest
7- Adjusting:
Calf support
8- Raising:
9- Lowering:
Seat unit
10- Highchair modes:
The highchair can be used in two modes:
(a) Reclined cradle mode:
The reclined cradle mode is intended for children from birth before they are able
to sit up unaided (approximately 6 months) or a maximum weight of 9 kg.
The backrest must be kept in the most reclined position (See step 7) and the calf
support must be raised to its highest position (See step 8).
The seat liner most be used in this mode.
(b) Highchair mode:
The highchair mode is intended for children able to sit up unaided
(approximately 6 months) and up to 36 months or a maximum weight of 15 kg.
Seat unit height:
11- Lowering:
12- Raising:
Feeding tray
13- Fitting:
Removal is a reversal of this procedure.
14- Adjusting:
NEVER use the tray if the symbol ( ) is visible.
Inner tray
15- Remove:
Feeding tray
16- Storage:
Harness
17- Opening:
18- Closing:
19- Adjusting the strap length:
Slide the strap adjustor to suitable length (a, b & c).
20- Harness tension:
Always make sure that the harness is correctly tensioned to ensure maximum
protection for your child.
EN
To Next Page
