Need help?Do you have a question about the Coseng SP711N and is the answer not in the manual?
General| Model | SP711N |
|---|---|
| Type | Wheel Balancer |
| Max. wheel weight | 65 kg |
| Rim width | 1.5" - 20" |
| Rim diameter | 10" - 24" |
| Balancing accuracy | ±1 g |
| Balancing speed | 200 rpm |
| Power supply | 220V / 50Hz |
Overview of essential keys for machine operation and mode selection.
Keys used to adjust distance, width, and diameter values.
Key combinations to set spin mode and weight units (g/oz).
Accessing calibration programs for distance, width, and diameter.
Entering optimization, ALU-S, APS, and saving user presets.
Procedures for mounting wheels using back and front centering cones.
Methods for entering distance, width, and diameter data for balancing.
Setting wheel data automatically using machine measuring arms.
Storing and recalling specific wheel data for multiple users.
Choosing the correct vehicle type for balancing mode.
Standard procedure for dynamic wheel balancing with clip-on weights.
Applying adhesive weights on alloy rims for precise balancing.
Splitting a single weight into two hidden weights behind spokes.
Balancing wheels with a single counterweight, suitable for narrow rims.
Alternative Plane Static balancing for precise weight application.
Procedures for static and dynamic balancing of motorcycle wheels.
Procedure for calibrating the wheel balancer for accurate measurements.
Calibrating wheel distance and diameter measurements.
Configuring system parameters after hardware changes or for optimization.
To Next Page