1
3
5 6
4
2
HEATER ASSEMBLY
Attach the bottom woven post on steel base. The
door opening should face the opposite of the wheels.
Attach the bolts (G).Attach the washers (F) on the 4 holes.
Screw in the bolts (G) with the hexagon wrench (H). Make sure all 4 bolts (G) are screwed tightly.
Open the lid and fill with the sand (J) into the plastic
tank, and then tighten lid.
Woven Wicker Patio Heater ITM. / ART 853382
Contact 1-855-716-8097 or Email CUSTOMERSERVICE@ANDERSENSTOKKE.COM
for assistance. (US, English only / Monday - Friday 8:00 am - 6:00 pm (Eastern time))
page no.5
To Next Page
Loading...