This document is a user's manual for a 4-piece outdoor rattan conversation set, model HW68722. It provides instructions for assembly, care, and maintenance of the furniture.
Function Description:
The HW68722 is a 4-piece outdoor rattan conversation set designed for outdoor use, likely in patios, gardens, or other recreational areas. The set includes a two-seater bench, two single chairs, and a coffee table, providing comfortable seating and a surface for drinks or other items. The rattan construction suggests durability and weather resistance, making it suitable for various outdoor environments. The cushions included for the bench and chairs enhance comfort for users.
Important Technical Specifications:
The manual details the components of the set, which include:
- Table: Composed of two table side frames (A), two table back and front frames (B), and one glass tabletop (C).
- Bench: Consists of one bench back frame (G), two right armrests (F), two left armrests (E), one bench seat frame (H), and one bench cushion (P).
- Chairs (x2): Each chair is made up of one chair back frame (I), one right armrest (F), one left armrest (E), one chair seat frame (J), and one chair cushion (U).
Hardware:
The assembly requires various screws and an Allen key:
- M6X20 screws (4 pieces)
- M6X40 screws (22 pieces)
- M6X60 screws (12 pieces)
- Ø6X14 washers (38 pieces)
- Allen key 4X98 (3 pieces)
Usage Features:
The set is designed for comfortable outdoor lounging and conversation. The inclusion of cushions for all seating pieces (bench and chairs) indicates a focus on user comfort. The coffee table provides a convenient surface for placing beverages, snacks, or decorative items. The modular nature of the 4 pieces allows for flexible arrangement to suit different outdoor spaces and social settings. The rattan material, combined with the structural frames, suggests a robust design suitable for outdoor conditions.
Assembly Process:
The manual emphasizes a careful, step-by-step assembly process:
- Preparation: Before starting, users are advised to read each step carefully, ensure all parts are included (parts are labeled or stamped), work in a spacious area (preferably on a carpet to prevent damage), and use hand tools only to avoid scratching or damaging parts.
- Table Assembly (Steps 01-02):
- Step 01: Attach the table back and front frames (B) to the table side frames (A) using M6X20 screws (1) and M6X40 screws (2), secured with Ø6X14 washers (4). The manual specifically warns against fully tightening screws at this stage to allow for alignment.
- Step 02: Once the frame is assembled and screws are partially tightened, the glass tabletop (C) is placed on top. After confirming alignment, all screws can be fully tightened.
- Bench Assembly (Steps 03-06):
- Step 03: Attach the bench back frame (G) to the left (E) and right (F) armrests using M6X60 screws (3) and Ø6X14 washers (4). Again, partial tightening is recommended.
- Step 04: Connect the bench seat frame (H) to the assembled armrests and back frame.
- Step 05: Secure the bench seat frame (H) to the armrests (E, F) and back frame (G) using M6X40 screws (2) and Ø6X14 washers (4).
- Step 06: Place the bench cushion (P) onto the assembled bench seat. All screws should be fully tightened at this point.
- Chair Assembly (Steps 07-10) - Repeated for two chairs:
- Step 07: Attach the chair back frame (I) to the left (E) and right (F) armrests using M6X60 screws (3) and Ø6X14 washers (4). Partial tightening is advised.
- Step 08: Connect the chair seat frame (J) to the assembled armrests and back frame.
- Step 09: Secure the chair seat frame (J) to the armrests (E, F) and back frame (I) using M6X40 screws (2) and Ø6X14 washers (4).
- Step 10: Place the chair cushion (U) onto the assembled chair seat. All screws should be fully tightened.
Maintenance Features:
The manual provides comprehensive care and maintenance guidelines to ensure the longevity of the furniture:
- General Cleaning: Use a soft, clean cloth for dusting to avoid scratching the surface. Furniture polish is not strictly necessary, but if used, it should be tested in an inconspicuous area first.
- Solvents: Avoid using any kind of solvents on the furniture, as they can damage the finish.
- Liquid Spills: Liquid spills should be removed immediately. Blot the spill gently with a soft, clean cloth; avoid rubbing.
- Hardware Check: Periodically check and tighten all bolts and screws as necessary to maintain structural integrity.
- Outdoor Protection: To protect outdoor furniture, it is highly recommended to use a cover when the set is not in use. Long-term exposure to sunlight can damage the surface.
- Environmental Factors: Wood and metal frames can suffer damage when exposed to extreme temperatures and humidity. Proper care and cleaning will extend the life of the product. Following these tips will help the furniture age gracefully.
The manual concludes with contact information for customer service in the US, UK, and AU for assistance with missing or damaged parts.
Need help?
General
To Next Page
