Costway OP3553 - User Manual

Need help?

Do you have a question about the Costway OP3553 and is the answer not in the manual?

Summary

Contact and Preparation

Contact Information

Provides contact details for customer service inquiries.

Before You Start Guide

Key steps to follow before beginning assembly and use.

Assembly Instructions

Assemble Shower Components

Connects shower head, extension pipe, and coupler using Teflon tape.

Install Handle and Covers

Installs the on/off handle and color-coded covers (blue/red).

Connect Garden Hose

Attaches the garden hose to the shower's inlet port.

Leak Prevention

Tips for re-applying Teflon tape to prevent leaks at couplers.

Mounting the Shower

Location and Hole Marking

Select a sunny location and mark mounting holes for drilling.

Drilling and Fastening

Drill holes, insert expansion nuts, and secure the base plate.

Tightening Caution

Avoid overtightening bolts to prevent damage to the shower.

Shower Operation and Setup

Initial Setup Procedure

Fill shower with water and allow it to absorb sunlight for heating.

Using the Shower

Operate handle to use warm water; turn off water supply when done.

Water Temperature Safety

Warning: Water can exceed 130°F (55°C). Start with cool water.

Stagnant Water Advisory

Run shower for 2 minutes every 3 days to prevent bacteria growth.

Seasonal Care and Safety

Off-Season Disassembly

Disconnect hose and drain all water for storage.

Warranty Considerations

Avoid salt or anti-freezing methods to maintain warranty.

General Safety Warnings

Do not use in high winds; do not climb or stand on the shower.

Important Safety Information

Keep small parts and plastic bags away from children.

This document provides a comprehensive guide for the assembly, installation, operation, and maintenance of a solar shower, designed to offer a convenient and eco-friendly outdoor showering experience. The solar shower harnesses sunlight to heat water, providing warm water without the need for electricity or gas. Its design emphasizes ease of use, safety, and durability, making it a suitable addition for various outdoor settings such as gardens, pool areas, or campsites.

Function Description:

The primary function of this device is to provide a warm outdoor shower by utilizing solar energy. It consists of a main unit, an extension pipe, a shower head, and a coupler, all designed to work together to heat and dispense water. The system connects to a standard garden hose, which supplies cold water to the main unit. Within the main unit, the water is exposed to sunlight, which gradually heats it. A mixing valve, controlled by a handle, allows the user to blend the heated water with cold water to achieve a desired temperature, ensuring a comfortable and safe showering experience. The shower head then dispenses the mixed water. The device is intended for outdoor use and is designed to be installed on a solid, stable surface to ensure safety and prevent tipping.

Usage Features:

The solar shower is designed with several features to enhance its usability and safety.

Solar Heating: The core feature is its ability to heat water using only solar energy. This makes it an environmentally friendly and cost-effective solution for outdoor showering. The heating process can take up to three hours, depending on sunlight availability and ambient temperature, but a recently used shower that hasn't been emptied will heat faster due to retained hot water.
Temperature Control: A crucial safety and comfort feature is the mixing valve. The handle allows users to adjust the water temperature by blending hot water from the solar reservoir with cold water from the supply. It is strongly recommended to start with the handle in the middle position (between hot and cold) and gradually adjust towards the hot side to avoid scalding, as water temperatures can reach over 130°F (55°C) or even 140°F (60°C) under strong sun. The blue indicator typically signifies cold water, and red signifies hot water.
Easy Connection: The shower is designed to connect easily to a standard garden hose via an inlet port. This simplifies the setup process, allowing users to quickly integrate it into their existing outdoor water supply system.
Stability and Safety: The shower is intended for installation on a solid surface, such as a concrete floor or a concrete base. It comes with a base plate featuring pre-drilled holes and expansion nuts with bolts for secure mounting. This ensures the stability of the unit, preventing it from falling over, especially in windy conditions, and mitigating risks to users, children, or property. It is explicitly stated that the device is not a recreational item, and users should not climb on, hang from, or stand on it.
Initial Setup Procedure: For the first use, a specific setup procedure is recommended to ensure proper filling and prevent air pockets. This involves turning the shower handle to the "FULL ON HOT" position while filling the shower with water from the garden hose. Once water flows from the shower head, the handle is turned off to allow the water to begin heating.
Warning for Stagnant Water: A significant safety warning is provided regarding stagnant water. If the shower has not been used for more than three days, it is recommended to run the shower for two minutes to flush out stagnant water. This is crucial because stagnant water in a warm environment can foster the growth of hazardous bacteria.

Maintenance Features:

Proper maintenance is essential to ensure the longevity and optimal performance of the solar shower.

Regular Cleaning: After each use, it is recommended to wipe the shower off. For off-season storage, a soft cloth should be used to clean the solar shower.
Off-Season Disassembly and Storage: For off-season protection, especially in environments prone to frost or freezing temperatures, specific steps must be followed. The garden tap connected to the shower's inlet should be closed, and the cold and hot water valve should be in the "OPEN" position. This allows all water in the solar shower to drain out through the shower head, preventing damage from freezing. It is explicitly stated that damage caused by frozen temperatures will not be covered by the warranty. The shower should be stored dry and safe from environmental influences.
Prohibition of Anti-Freezing Methods: Users are strictly warned against using salt or other anti-freezing methods, as this will void the product warranty.
Leak Prevention and Repair: The assembly instructions emphasize the importance of using Teflon tape on all threaded connections (showerhead fitting, extension pipe, coupler, and inlet port) to prevent leaks. If leaks occur, users are advised to remove the fitting, re-wrap the threading with additional Teflon tape, and reattach it. Special attention should be paid to the handle connection, as a loose handle can cause water to enter the shower and drip.
Water Quality: The warranty does not cover damage caused by using mud water or salt water, highlighting the importance of using clean water for the shower.

The manual also includes contact information for customer service, encouraging users to reach out for assistance with missing or damaged parts rather than returning the item. It emphasizes the company's commitment to customer satisfaction and continuous improvement, inviting users to provide feedback and ratings.

Costway OP3553 Specifications

General

Category	Bathroom Fixtures
Mounting	Wall Mounted
Material	Zinc Alloy, Stainless Steel
Color	Silver
Product Name	Costway
Type	Bathroom Hardware Set
Installation Type	Screw

Related product manuals

Costway NP10570

13 pages