5
English
machine or remove debris, always rst turn the machine off and unplug it.
47. Always turn the machine off and unplug it before changing, adjusting, or cleaning the machine, or measuring the
work piece to be sawed.
48. Turn the machine off and unplug it before leaving the work place.
49. Electric installation, repairs, and maintenance should only be performed by a professional.
50. All covers and safety devices must be restored immediately after repair or maintenance.
51. It is important to adhere to the safety, use, and maintenance instructions of the manufacturer, as well as to adhere to
the dimension instructions indicated in “technical data.”
52. It is necessary to adhere to the rules of the Labour Protection Board as well as other general safety rules.
53. Only use the machine with dust suction in a closed room, if the room has inowing air, to avoid creating a vacuum in
the room.
54. The saw should only be connected to sockets with 230V secured with at least 10 A.
55. Damaged safety devices and parts must be replaced or repaired by a professional at an authorized service facility.
56. This machine complies with all relevant safety regulation. The machine must only be repaired by a professional at
an authorized service facility using original spare parts. Unless you adhere to this rule, it may lead to accidents and
expose the user to danger.
Product marking with safety symbols on the machine
Read the entire operations manual.
Read the entire operations manual and attempt to understand how the machine works.
Use ear plug!
There is a risk of impaired hearing. Always use ear plugs when operating the machine.
Use protective eyeglasses!
Protect your eyes from ying debris and use protective eyeglasses or a visor.
Use protective shoes!
Use protective shoes with a steel toe that protect against falling objects.
Keep visitors away from the proximity of the machine!
Keep children, pets, and spectators a minimum of 5 metres away from the risk zone of the machine.
Caution: Be attentive, keep your hands away from the proximity of the saw blade!
There is a risk of injury during contact with rotating saw blade, also at a low speed.
Do not use the help of assistants, unless necessary!
It is prohibited for people other than the machine operator to be present in the risk zone of the machine.
Turn off the machine and unplug it from the power source before cleaning and service!
Read this manual thoroughly and think through the information provided. Use the manual to acquaint yourself with the
machine, its use and safety rules.
Even if the machine is used completely according to the directions, it is impossible to eliminate all potential risks. The
construction and use of the machine may be the cause of the following risks when the saw is in use:
• Contact with the saw blade where the cover does not reach.
• Contact with a rotating saw blade (cut injury.)
• The work piece being sawed or parts thereof being thrown backwards to the user (kickback.)
• Breeches on the saw blade.
• Hard metal cuttings may come loose and be expelled out.
• Hearing loss may occur if no ear plugs are used.
• Harmful dust may cause injury in poorly ventilated areas.
To Next Page
Loading...
General