Medical Pendants
TRIGGERING PENDANT
TESTING PENDANT
CHANGING BATTERIES
17
sure the + sign is facing towards you. Replace the cover and tighten the 4 screws.
Medical Pendants require one CR2032 battery. To change the battery, remove the bottom
cover by using a screwdriver to remove the 4 screws. Use a screwdriver to slide the batteries
out from under the black padded circles. When installing the new battery, make sure the +
sign is facing towards you. Replace the cover and tighten the 4 screws. After replacing the
batteries it is recommended that you test the sensor to make sure it works properly.
SEE PAGE 9 FOR REFERENCE TO:
To Next Page
Loading...