18
17
HOW TO CLEAN
Maintenance
10.
After closing the top cover and connecting the power plug, open the main water supply valve.
Please operate the water ltration device again by pressing the cold water/hot water mode
selection button at the front of the product after checking if the water is coming from the
cold water/ambient water extraction faucet and the hot water extraction faucet.
9. Plug the power plug. Open the main water supply valve.
8.
Install the Antibacterial lter into the inner water tank cover by turning the lter,
closing the inner water tank cover and closing the xing clips (6 points) of the inner water tank.
▶