Coway CHP/CP-6310L

PLEASE CHECK BEFORE USE
This product is for 220 V - 240 V~, 50 Hz.
Make sure to connect the power plug to a grounded 220 V - 240 V~, 50 Hz outlet.
It requires a power supply to operate.
■
Open the tap water supply valve
The water purier can work properly only when the
tap water is supplied.
■
When indicator light on the display is
turned o
When the indicator light is o, check if there is a
blackout or if the power supply is cut o for other
reasons.
■
When the product has not been used
for a long time
Completely drain the stored water as well as newly
ltered water one more time prior to use when
using the product after an extended period of time.
■
After installation
After installation, lter and drain water for at least
130 minutes(Use after draining puried water at
least twice).
■
Regular lter replacement
Regular lter replacement is crucial for clean
drinking water. Using expired lters decreases
water purier performance, so please replace the
lters on time.
■
How to drain hot water
Press the drain cover on the side of the device, then
insert the drain hose (continuous dispensing hose) to
drain hot water from inside the hot water tank
(Be careful not to be burned while draining hot water).
Please check before use
Turn o the tap water valve and unplug the power cord when not using the water
purier for a long time.
Tips