10
9
PLEASE CHECK BEFORE USE
This water ltration unit must be plugged into its own
dedicated 120 V~ 60 Hz, AC only electric outlet.
It must be plugged into a grounded 120 V~ 60 Hz outlet. It must
be connected to a power source for the product to work normally.
Please check before use!
Open the main water supply valve.
The main water supply must be turned on
for the product to work normally.
When the indicator in the indication part
is turned off.
When the indicator in the indication part is
turned o, check if the power supply was
shut o due to power failure or other causes.
When the user has not used the product
for a long time
When the user has saved water for a long
time or has not used water for a while, drain
the water inside the water filtration device
completely, and rinse out the newly filtered
water one time before use.
After installing the water filtration
system
Following the product installation, make
sure the water tank is emptied or the water
is ltered for 50 minutes or longer. (Empty
the water tank filled with filtered water two
times or more.)
Regular lter replacement
It is very important to replace the filter
regularly to maintain the intended water
quality. If the filter is used beyond its service
life, the performance of the water filtration
device will deteriorate. Take note of the filter
replacement cycle.
When the user does not want to use
product for an extended period
Close the main water supply valve and
unplug the power cord.
Close the main water supply valve and unplug the power cord.
Tips
How to Use
WATER FILTRATION PROCESSES / PLEASE CHECK BEFORE USE
To Next Page
Loading...
Need help?
General
