Coway CHPI-620L User Manual

24
23
3. After removing the tting from the lter to be replaced, replace the lter
(use a proper tool for the separation).
4. Fit the front cover into the slots and push it in. Use a screwdriver to tighten
the screw on the front drain and slide the slots into place and push the
front drain cover to close it.
►
►
Following lter replacement, check if there is a leak by connecting the tting
and hose tightly, and make sure the rst ltered water is drained.
A new lter must be rinsed out before use.
- Neo-Sense lter: Assemble after ushing it for about 1 minute.
- Plus Inno-Sense lter: Assemble it without ushing.
- Membrane (RO): Install a reject water valve, and ush it for about 5 minutes
before assembly.
Tips
Tips
HOW TO REPLACE THE FILTER
Maintenance

Coway CHPI-620L Specifications

General

Brand	Coway
Model	CHPI-620L
Category	Water Filtration Systems
Language	English