26
25
PRODUCT SPECIFICATIONS
Product Name Electric Cold Water Dispenser (Hot Water and Ice Maker combined)
Model CHPI-620L
Filtration Method Reverse osmosis system
Recovery Rate 50 % (343 kPa, 25 °C, NaCl 200 ppm)
Standard Power Voltage 120 V~ 60 Hz
Rated Power Input Motor: 0.9 A, heater: 310 W
Cooling Method Natural cooling method (refrigerant: R-134a)
Major Features
Ambient water, cold water, ice-making, hot water,
overheating prevention, supercooling prevention
Water
Tank
Capacity
Ambient water 3.5 L
Cold water 2.5 L
Hot water 1.5 L
Ice 1 kg
Total 7.5 L
Filter
Material
Neo-Sense Filter Active carbon block
Membrane lter (RO) Reverse osmosis membrane
Plus Inno-Sense lter Active carbon block, felt
Antibacterial lter Ceramic ball
Size (W x D x H) 300 mm (W) × 500 mm (D) × 1,291 mm (H)
Water Temperature 5 °C - 35 °C
Working Temperature 5 °C - 35 °C
Daily Filtration Flow 265 L/d (on the basis of NSF/ANSI 58: 345 kPa, 25 °C, NaCl 750 ppm)
Working Pressure 138 kPa – 827 kPa
Weight 35.2 kg
• Daily ltration ow reects test results in line with standards set by an institute. It may vary
depending on the water pressure, temperature, and quality of where the ltration unit is
installed.
• Water tank capacity reects the size of the water tank, and may be dierent from what is
dispensed from the ltration unit.
• For product improvement purposes, product specications are subject to slight changes without
prior notice.
• Recovery rate refers to the rate of outow quantity in relation to inow quantity.
TROUBLESHOOTING / PRODUCT SPECIFICATIONS
Others
To Next Page
Loading...
Need help?
General
