COX A19121L - Page 9

7  2021 Page 9  ZTR Model A191
21 MONTHS OR 175 HOURS which ever occurs first
Change engine oil if operating under heavy load or high ambient
temperature
Check engine air cleaner foam pre-cleaner, service if required *
Check engine rotating screen/finger guard, clean if required *
Check operation of safety switches and replace if required
Check tyre pressures, adjust if required
Check mowing attachment cutter blades, bolts, nuts, housing and
guards for wear or damage, replace if required
Check for loose fasteners, tighten if required
*Service more often under dusty conditions, or where air borne debris is present
DATE / / HOURS...............CUSTOMER/DEALER................................................
24 MONTHS OR 200 HOURS which ever occurs first
Replace engine oil filter
Change engine oil
Check engine spark plug, clean, adjust, or replace if required
If fitted clean engine exhaust spark arrestor
Check engine air cleaner foam pre-cleaner , service if required *
Check engine air cleaner cartridge, service if required
Clean engine cooling system*
Check operation of safety switches, service if required
Check tyre pressures, adjust if required
Check mowing attachment cutter blades, bolts, nuts, housing and
guards for wear or damage, replace if required
Check belts for wear or damage, replace if required
Check drive lever for smooth action, adjust if required
Check for loose fasteners, tighten if required
*Service more often under dusty conditions, or where air borne debris is present
DATE / / HOURS..........................DEALER................................................
12 MONTHS OR 100 HOURS which ever occurs first
DATE / / HOURS..........................DEALER................................................
*Service more often under dusty conditions, or where air borne debris is present
Change engine oil filter
Change engine oil
Check engine spark plug, clean, adjust, or replace if required
If fitted clean engine exhaust spark arrester
Check engine air cleaner foam pre-cleaner , service if required *
Check engine air cleaner cartridge, service if required*
Clean engine cooling system*
Replace in-line fuel filter
Check for loose fasteners, tighten if required
Check operation of safety switches, service if required
Check tyre pressures, adjust if required
Check mowing attachment cutter blades, bolts, nuts, housing and
guards for wear or damage, replace if required
Check drive lever for smooth action, adjust if required
Re-tension rear wheel retaining nut/s
Check belts for wear or damage, replace if required
*Service more often under dusty conditions, or where air borne debris is present
15 MONTHS OR 125 HOURS which ever occurs first
DATE / / HOURS................CUSTOMER/DEALER................................................
Change engine oil if operating under heavy load or high ambient
temperature
Check engine air cleaner foam pre-cleaner, service if required *
Check engine rotating screen/finger guard, clean if required *
Check operation of safety switches and replace if required
Check tyre pressures, adjust if required
Check mowing attachment cutter blades, bolts, nuts, housing and
guards for wear or damage, replace if required
Check for loose fasteners, tighten if required
Check belts for wear or damage, replace if required
18 MONTHS OR 150 HOURS which ever occurs first
*Service more often under dusty conditions, or where air borne debris is present
DATE / / HOURS..........................DEALER................................................
Change engine oil
If fitted clean engine exhaust spark arrestor
Check engine air cleaner foam pre-cleaner , service if required *
Check engine rotating screen/finger guard , clean if required *
Check operation of safety switches, service if required
Check tyre pressures, adjust if required
Check mowing attachment cutter blades, bolts, nuts, housing and
guards for wear or damage, replace if required
Check belts for wear or damage, replace if required
Check drive lever for smooth action, adjust if required
Check for loose fasteners, tighten if required