COX LAWNBOSS - Page 12

5 October 2021 Page 12 LawnBoss ZTR Model A19120G
57 MONTHS OR 475 HOURS which ever occurs first
Change engine oil if operating under heavy load or high ambient
temperature
Check engine air cleaner foam pre-cleaner, service if required *
Check engine rotating screen/finger guard, clean if required *
Check operation of safety switches and replace if required
Check tyre pressures, adjust if required
Check mowing attachment cutter blades, bolts, nuts, housing and
guards for wear or damage, replace if required
Check for loose fasteners, tighten if required
*Service more often under dusty conditions, or where air borne debris is present
DATE / / HOURS.................CUSTOMER/DEALER................................................
60 MONTHS OR 500 HOURS which ever occurs first
Replace engine oil filter
Change engine oil
Check engine spark plug, clean, adjust, or replace if required
If fitted clean engine exhaust spark arrestor
Check engine air cleaner foam pre-cleaner , service if required *
Check engine air cleaner cartridge, service if required
Clean engine cooling system*
Check operation of safety switches, service if required
Check tyre pressures, adjust if required
Check mowing attachment cutter blades, bolts, nuts, housing and
guards for wear or damage, replace if required
Check belts for wear or damage, replace if required
Check drive lever for smooth action, adjust if required
Check for loose fasteners, tighten if required
*Service more often under dusty conditions, or where air borne debris is present
DATE / / HOURS..........................DEALER................................................
63 MONTHS OR 525 HOURS which ever occurs first
Change engine oil if operating under heavy load or high ambient
temperature
Check engine air cleaner foam pre-cleaner, service if required *
Check engine rotating screen/finger guard, clean if required *
Check operation of safety switches and replace if required
Check tyre pressures, adjust if required
Check mowing attachment cutter blades, bolts, nuts, housing and
guards for wear or damage, replace if required
Check for loose fasteners, tighten if required
*Service more often under dusty conditions, or where air borne debris is present
DATE / / HOURS................CUSTOMER/DEALER................................................
66 MONTHS OR 550 HOURS which ever occurs first
Change engine oil
If fitted clean engine exhaust spark arrestor
Check engine air cleaner foam pre-cleaner , service if required *
Check engine rotating screen/finger guard , clean if required *
Check operation of safety switches, service if required
Check tyre pressures, adjust if required
Check mowing attachment cutter blades, bolts, nuts, housing and
guards for wear or damage, replace if required
Check belts for wear or damage, replace if required
Check drive lever for smooth action, adjust if required
Check for loose fasteners, tighten if required
*Service more often under dusty conditions, or where air borne debris is present
DATE / / HOURS..........................DEALER................................................
69 MONTHS OR 575 HOURS which ever occurs first
Change engine oil if operating under heavy load or high ambient
temperature
Check engine air cleaner foam pre-cleaner, service if required *
Check engine rotating screen/finger guard, clean if required *
Check operation of safety switches and replace if required
Check tyre pressures, adjust if required
Check mowing attachment cutter blades, bolts, nuts, housing and
guards for wear or damage, replace if required
Check for loose fasteners, tighten if required
*Service more often under dusty conditions, or where air borne debris is present
DATE / / HOURS.................CUSTOMER/DEALER................................................