Need help?Do you have a question about the Craftex B2337 and is the answer not in the manual?
Procedure for mounting the grinder on a standard height bench, positioning it from the front edge.
Instructions for sliding lock bars of the pivot plate assembly onto the table and tightening the locking knob.
Steps to firmly mount the work plate using provided hardware and place the knife support assembly.
Guidance on traversing the knife support assembly for sharpening and removing nicks.
Steps for using tool clamps to sharpen planer blades with light, cool grinding strokes.
Procedure for sharpening chisels similar to planer blades, using tool clamps for support.
To Next Page
General