To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 10137 - 1/2 in. Corded Hammer Drill and is the answer not in the manual?
General| Power Source | Corded |
|---|---|
| Chuck Size | 1/2 in. |
| Hammer Function | Yes |
| Variable Speed | Yes |
| Max RPM | 2800 RPM |
| Max BPM | 44800 BPM |
| Voltage | 120V |
| No Load Speed | 0-2800 RPM |
| Amperage | 7.0 A |
| Beats Per Minute (BPM) | 44800 BPM |
Proper plug matching, avoid grounding, keep away from water, and care for the cord.
Stay alert, use safety equipment, and avoid accidental starting.
Specifies power supply requirements: 120V, 60Hz, AC only.
Guidelines for selecting and using extension cords based on length and gauge.
How to turn the drill on/off and control speed with pressure.
How to tighten, release, and use the keyless chuck with drill bits.
How to change the direction of bit rotation using the selector.
Step-by-step guide for inserting and removing drill bits.
