To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 247.28933 and is the answer not in the manual?
General| Engine Displacement | 190cc |
|---|---|
| Cutting Width | 21 inches |
| Cutting Height Positions | 6 |
| Deck Material | Steel |
| Wheel Size (Front) | 8 inches |
| Grass Collection | Rear Bag |
| Mulching Capability | Yes |
| Side Discharge | Yes |
| Cutting Height Range | 1.25 - 3.75 in. |
| Wheel Size (Rear) | 11 inches |
| Starting System | Recoil |
| Fuel Tank Capacity | 1.0 quart |
| Drive System | Self-propelled rear-wheel drive |
Read, understand, and follow all instructions on the machine and in the manual(s) before attempting to assemble and operate.
Slopes are a major factor related to loss of control and tip-over accidents which can result in severe injury or death.
Instructions on how to open the tractor hood to access components.
Step-by-step guide for connecting the positive and negative battery cables correctly.
Recommended tire pressure for front and rear tires to ensure proper operation.
Statement confirming the tractor conforms to ANSI safety standards.
Description of the tractor's monitoring system and indicator lights.
Location and function of the choke control knob for starting the engine.
Instructions for engaging and disengaging the PTO to power the cutting deck.
How to set and release the parking brake, and its importance when leaving the tractor unattended.
Description of the forward control pedal and how it affects tractor speed.
Description of the reverse control pedal and its effect on tractor speed.
Location of the tractor's cup holder.
How to adjust the seat forward or rearward for a comfortable operating position.
Location of the fuel fill cap and how to view the fuel level.
Location and use of the cargo net for storing personal items.
Function of the IVT transmission release levers for manually moving the tractor.
Instructions and precautions for adding engine oil and gasoline.
Explanation of the safety interlock system designed for safe operation.
Instructions and warnings for operating the tractor in REVERSE CAUTION MODE.
Step-by-step instructions for starting the engine, including choke and throttle usage.
Procedure for stopping the engine safely, including disengaging PTO and removing the key.
Important considerations and steps for driving the tractor smoothly and safely.
Explanation of how the innovative steering system works, from wide turns to zero turns.
Important safety precautions and techniques for operating the tractor on slopes.
Instructions on how to set the parking brake and its importance when leaving the tractor.
How to engage the PTO to transfer power to attachments like the cutting deck.
Tips and recommendations for effective and safe mowing with the tractor.
Instructions for engaging release levers to manually move the tractor.
Information on when the tractor headlights turn on.
A detailed schedule of maintenance tasks and intervals for proper upkeep.
Procedures for checking and changing engine oil and oil filter.
Instructions for inspecting and replacing the fuel filter.
Steps for removing and cleaning or replacing the air filter element.
How to clean, inspect, and replace the spark plug.
Periodic inspection and replacement of the muffler.
Daily cleaning of the engine to remove debris and ensure proper airflow.
Note that the carburetor is not adjustable.
Lubrication points and procedures for various components.
Information on recommended tire pressure and importance of even pressure.
Procedure for cleaning steering gears once a year or if tight spots are experienced.
Instructions for cleaning spills and removing grass clippings from the machine.
How to use the Deck Wash System to rinse the cutting deck underside.
Maintenance of the battery, including cleaning terminals and cable connection order.
Instructions for charging the tractor battery if it has not been used for an extended period.
Steps for cleaning the battery by removing and washing it.
Common causes for battery failure not covered by warranty.
How to check the main harness fuse for electrical system issues.
General precautions for making adjustments and specific instructions for steering linkage.
How to adjust the front-to-rear pitch of the cutting deck for proper leveling.
How to adjust deck gauge wheels to prevent scalping the turf.
How to check and tighten the pivot bar for excessive play in the steering wheel.
Step-by-step instructions for removing the cutting deck from the tractor.
Safety precautions and procedures for removing, sharpening, and replacing cutting blades.
Safety precautions and instructions for replacing PTO belt and other belts.
Note on changing the transmission drive belt, advising professional service.
Instructions for reinstalling the cutting deck onto the tractor.
Steps to prepare the engine for storage, including fuel stabilization or draining.
Instructions for cleaning and lubricating the tractor before storage.
Common causes and remedies for the engine not starting.
Troubleshooting steps for an engine running rough or erratically.
Causes and solutions for engine overheating.
Troubleshooting steps for engine hesitation.
Causes and remedies for rough engine idling.
Troubleshooting steps for excessive vibration.
Reasons and solutions for the mower not mulching grass properly.
Troubleshooting steps for an uneven grass cut.
Diagram and part list for the tractor's frame assembly.
Part number and diagram for the electric PTO clutch.
Part number for the tractor battery.
Details on engine design, build, and conformity to emissions regulations.
Interpretation of warranty coverage for emissions-related parts based on maintenance requirements.
List of emission warranty parts included with each new engine.
