EasyManua.ls Logo

Craftsman 28991 - Page 35

Craftsman 28991
72 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TROUBLESHOOTING CHART:
See appropriate section in manual unless directed to Sears service center
PROBLEM CAUSE CORRECTION
Battery will not
charge
Loss of drive
1 Bad battery cell(s).
2 Poor cable connections.
3 Faulty regulator (if so equipped).
4 Faulty alternator.
1 Freewheel control in "disengaged"
position.
2 Motion drive belt worn, damaged,
or broken.
1 Replace battery.
2 Check/clean all connections.
3 Replace regulator.
4 Replace alternator.
1 Place freewheel control in
"engaged" position.
2 Replace motion drive belt.
3 Air trapped in transmission during 3 Purge transmission.
shipment or servicing.
Engine "backfires" 1 Engine throttle control not set 1 Move throttlecontrol between
when turning between half and full speed (fast) half and full speed (fast) position
engine "OFF" position before stopping engine, before stopping engine.
Engine dies when 1 Reverse operation system (ROS) 1
tractor is shifted is not "ON" while mower or other
attachment is engaged.
into reverse
Turn ignition key to ROS "ON"
position. See Operation section.
oYou_].,_,find the answez and mo;e or_ maz_agemyhemeoCOm - for free!
Find this and a[[ your other product manuats online.
oGetanswersfromourteamofhomeexperts.
[ Get a personalized maintenance plan for your home.
0Find information and tools to help with home projects.
a sage ho e !!
b_ooghttoyoobysoo,,_
35

Related product manuals