To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 315.115161 and is the answer not in the manual?
General| Brand | Craftsman |
|---|---|
| Model | 315.115161 |
| Category | Cordless Saw |
| Language | English |
Keep the work area clean, well-lit, and free of flammable materials.
Use only specified chargers and battery packs to avoid fire risk.
Stay alert, dress properly, avoid accidental starting, and remove wrenches.
Use tools correctly, maintain them, and use recommended accessories.
Explains kickback causes and how operators can prevent it.
Safety precautions for using the laser guide.
General safe operation practices, including eye and lung protection.
Servicing requires extreme care and knowledge by qualified personnel.
Details the technical specifications of the cordless trim saw.
Familiarize yourself with operating features and safety rules before use.
Used for making long or wide rip cuts.
Features a pre-travel safety switch to prevent accidental starting.
Convenient storage for quick blade changes.
Adjusts the depth of cut from 0 to 1-9/16 inches.
Instructions on carefully removing and inspecting the tool and accessories.
Lists all items included in the product package.
Step-by-step guide for securely attaching the saw blade.
Instructions for safely removing the saw blade.
Steps for attaching the edge guide for accurate rip cuts.
Lists the various cutting applications for the trim saw.
Explains the meaning of the LED indicators on the charger.
Initial instructions for charging the battery pack.
How to charge the battery pack when it's at normal temperature.
Procedures for charging a battery pack that has become hot.
Step-by-step guide for inserting the battery pack into the saw.
Instructions for safely removing the battery pack from the saw.
Explains kickback and provides practices to avoid it.
Discusses the importance of clean, sharp blades and blade maintenance.
Details the function and importance of the lower blade guard.
Procedure for starting and stopping the trim saw safely.
How to set the correct blade depth for cuts.
Guide on using the laser for alignment and precise cutting.
Correct techniques and helpful hints for operating the saw safely.
Instructions for performing cross cuts and rip cuts.
How to use the edge guide for rip cuts.
Using a straight edge for rip cuts when the edge guide is not used.
Instructions and tips for making bevel cuts at various angles.
Steps to adjust the bevel angle of the saw.
Procedure for making a bevel cut using the adjusted settings.
Information about the factory-set 0° bevel stop.
How to verify the accuracy of the 0° bevel stop.
Steps to adjust the positive 0° bevel stop.
Guide for performing pocket cuts safely.
Procedure for aligning the laser guide for accurate cutting.
Guidelines for cleaning and maintaining the tool.
Information regarding lubrication of tool bearings.
Steps to replace the batteries for the laser guide.
Information on nickel-cadmium batteries and care for longevity.
Instructions for removing and recycling battery packs.
