Craftsman 315.115370 User Manual

OPERATOR'S MANUAL
II:RRFTSMRN°I
3/8 in., 18 VOLT DRILL-DRIVER
VARIABLE SPEED/REVERSIBLE
Model No.
315.115370
_, WARNING: To reduce the risk of injury,
the user must read and understand the
operator's manual before using this
product.
Customer Help Line: 1-800-932-3188
Sears, Roebuck and Co., 3333 Beverly Rd., Heffman Estates, IL 60179 USA
Visit the Craftsman web page: www.sears.com/craftsman
983000-638
5-05
Save this manual for future reference

Craftsman 315.115370 Specifications

General

Model Number	315.115370
Category	Drill
Chuck Size	3/8 inch
Voltage	120V
Power Source	Corded Electric

Summary

Warranty and Introduction

Introduction to Craftsman Tool

This tool has many features for making its use more pleasant and enjoyable. Safety, performance, and dependability have been given top priority.

General Safety Rules

Work Area and Electrical Safety

Keep work area clean, avoid explosive atmospheres, use specified charger/battery, do not abuse cord.

Personal Safety and Tool Use

Stay alert, dress properly, avoid accidental starting, use clamps, do not force tool.

Specific Safety Rules

Tool Operation and Battery Safety

Hold by insulated grips, know your tool, wear eye protection, handle batteries carefully.

Battery Charging and Handling Safety

Do not charge in damp locations, let batteries cool, handle leakage with care.

Safety Rules for Charger

Charger Handling and Cord Safety

Read instructions, use specified charger, do not abuse cord, keep away from heat.

Charger Operation and Warnings

Use proper extension cords, do not operate damaged charger, avoid disassembly.

Chemical and Environmental Precautions

Avoid contact with plastics, be aware of dust hazards.

Symbols and Service Information

Understanding Tool Symbols

Explanation of electrical, measurement, safety, and usage symbols.

Signal Words and Service Requirements

Definitions of DANGER, WARNING, CAUTION and service by qualified technicians.

Features Overview

Product Specifications

Details on chuck, motor, speed, clutch, torque, charger input, and charge rate.

Tool Components and Functions

Identification of keyless chuck, trigger, worklight, rotation selector, torque ring, bit storage, and level.

Assembly and Packaging

Unpacking and Feature Details

Unpack tool, check packing list, learn about features like bit storage and torque adjustment.

Assembly Warnings

Do not operate with missing parts, avoid modifications, remove battery pack before assembly.

Operation Guide

General Operation, Applications, and Charging

Warnings, applications, and steps for charging the battery pack.

Battery Pack Installation and Removal

Instructions for correctly installing and removing the battery pack.

Controls and Chuck Usage

Using the switch trigger, variable speed, rotation selector, and keyless chuck.

Torque Clutch and Worklight

Adjusting the torque clutch and using the LED worklight.

Bit Installation and Drilling

How to install/remove bits and perform drilling operations safely.

Maintenance Procedures

General Maintenance and Chuck Removal

General cleaning, part replacement, and steps for removing the chuck.

Chuck Tightening and Battery Care

Retightening a loose chuck, battery life, storage, and recycling instructions.

Parts List

Component Identification and Ordering

Lists all parts with key numbers, descriptions, and quantities for reference.