EasyManua.ls Logo

Craftsman 358.794750 User Manual

Craftsman 358.794750
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Operator's Manual
I CRRFTSMRN°I
25cc/1.5 cu.in. 2-Cycle
200 MPH/430 CFM
GASOLINE POWERED
BLOWERNAC
Model No.
358.794750
Safety
Assembly
Operation
Maintenance
Parts List
Espa_ol, p. 21
WARNING:
Read and follow all Safety Rules and Operating
Instructions before first use of this product.
For answers to your questions about this product:
Call 7 am-7 pm, Mon.-Sat., or 10 am-7 pm, Sun.
1-800-235-5878 (Hours listed are Central Time)
Sears Brands Management Corporation, Hoffman Estates, IL 60179 U.S.A.
115381027 Rev. 3 9/30/10 BRW
Question and Answer IconNeed help?

Do you have a question about the Craftsman 358.794750 and is the answer not in the manual?

Craftsman 358.794750 Specifications

General IconGeneral
Model Number358.794750
CategoryBlower
BrandCraftsman
Engine Type2-Cycle
Displacement25cc
Air Volume430 CFM
Fuel Mix Ratio40:1
TypeGas-powered handheld blower
Noise Level70 dB

Summary

Warranty Statement

Craftsman Two Year Full Warranty

Product is warranted against any defects in material or workmanship for two years.

Identification of Safety Symbols

Thrown Object Hazards and Protection

Wear hearing protection, safety glasses, and protective clothing when operating.

Safety Zone for Thrown Objects

Maintain a 30-foot safety zone around the operating area.

Maintenance Safety Precautions

Disconnect spark plug before cleaning or servicing the unit.

Safety Rules

Know Your Unit

Read and understand the operator's manual and safety rules.

Handle Fuel Safely

Handle fuel safely to prevent fire hazards and engine damage.

Plan Ahead for Safety

Always wear eye protection when operating or performing maintenance.

Safe Operating Practices

Follow safe operating practices for blower and vacuum modes.

Assembly

Operation

Operating Tips

Fueling Engine Instructions

Mix unleaded gasoline with 2-cycle oil at a 40:1 ratio.

Starting Engine

Cold Engine Starting Procedure

Follow steps involving primer bulb, start lever, and starter rope for cold starts.

Warm Engine Starting Procedure

Use throttle trigger and starter rope for warm engine starts.

Maintenance

Maintenance Task Responsibilities

Perform maintenance tasks as instructed in the manual.

Troubleshooting Table

Engine Will Not Start

Troubleshoot common causes like flooding, empty tank, or spark plug issues.

Engine Will Not Idle Properly

Address issues like fuel delivery, carburetor adjustment, or worn seals.

Engine Lacks Power or Dies Under Load

Diagnose problems with air filter, fuel delivery, spark plug, or carburetor.

Engine Smokes Excessively

Check fuel mixture, air filter, spark plug, and carburetor for smoking issues.

Engine Runs Hot

Identify causes like incorrect fuel mixture, spark plug, or carburetor settings.

Related product manuals