To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 917.272464 and is the answer not in the manual?
General| Engine Type | Gasoline |
|---|---|
| Engine Displacement | 190cc |
| Cutting Width | 21 inches |
| Cutting Height | 1.25 - 3.75 inches |
| Deck Material | Steel |
| Oil Capacity | 20 oz |
| Engine Brand | Briggs & Stratton |
| Wheel Size | 8 inches (front), 8 inches (rear) |
Covers defects in material or workmanship for 2 years, including free labor.
Covers battery defects for 90 days from purchase date.
Key safety instructions for everyday operation, including clearing areas and adult supervision.
Critical precautions for operating the tractor safely on inclines and slopes.
Essential guidelines to prevent accidents involving children around the tractor.
Safety measures for handling fuel, oil, and performing maintenance tasks.
Lists necessary tools and procedures for safely unpacking the tractor from its packaging.
Guides for attaching the steering wheel, checking the battery, and installing the seat.
Instructions for safely moving the tractor off its shipping skid.
Procedures for installing the mulcher plate and checking tires, deck levelness, belts, and brakes.
A final checklist to ensure the tractor is ready for safe and proper operation.
Explains the meaning of hazard symbols (DANGER, WARNING, CAUTION) and other alerts.
Identifies and explains the function of all major controls and adjustment points on the tractor.
Guides on engaging the parking brake and safely stopping mower blades, drive, and engine.
Instructions for using the throttle, choke, and motion control lever for movement and height adjustment.
Tips for operating the mower, adjusting gauge wheels, and crucial safety for slopes.
Procedures for preparing the tractor for transport, including disengaging the transmission.
Covers checking oil, adding fuel, and starting the engine, including warm weather procedures.
Explains transmission operation and safe towing practices for attachments.
Specific procedures for starting the engine and warming up the transmission in cold temperatures.
Detailed steps to ensure proper transmission operation by removing trapped air.
Advice on mower leveling, cutting patterns, and handling grass conditions for optimal results.
Guidance on mulching, including best times to mow and adjusting cutting height for clippings.
Outlines required maintenance tasks and general recommendations for tractor upkeep.
A list of essential checks to perform before each operation of the tractor.
Procedures for verifying the proper function of brakes, tire pressure, and safety interlock systems.
Guidelines for mower blade maintenance, including removal, sharpening, and balancing.
Instructions for battery maintenance, terminal cleaning, and transaxle cooling.
Guidance on checking V-belts and performing engine oil changes based on usage.
Procedures for servicing and replacing the engine's oil filter and air filter components.
Steps to clean air screens, cooling fins, and shrouds to prevent engine overheating.
Tasks for inspecting and replacing the muffler, spark plug, and fuel filter for optimal performance.
Recommendations for cleaning the tractor's exterior, protecting paint, and avoiding water damage.
Essential safety warnings and steps to take before performing any service or adjustments on the tractor.
Detailed instructions for safely removing the mower deck and reinstalling it onto the tractor.
Procedures for adjusting the mower deck for optimal side-to-side and front-to-back leveling.
Guides for replacing the mower blade drive belt, including removal and installation steps.
Steps to verify brake performance and adjust the system for proper stopping distance.
Procedures for replacing the motion drive belt, including removal and installation.
Instructions for adjusting the transaxle neutral control and steering wheel alignment.
Procedures for removing tractor wheels to perform tire repair or other wheel maintenance.
Safety procedures for jump-starting the engine using jumper cables from another vehicle.
Guides for replacing the tractor's battery and headlight bulb with correct procedures.
Information on checking interlocks, relays, wiring, and replacing blown fuses.
Steps for removing and reinstalling the tractor's hood and grill for access to engine components.
Procedures for adjusting the throttle and choke control cables for optimal engine performance.
Guidance on carburetor adjustments, emphasizing factory settings and professional service needs.
Steps for preparing the tractor and mower for storage, including cleaning and lubrication.
Instructions for preparing the engine's fuel system to prevent gum deposits and fuel system damage during storage.
Procedures for changing engine oil and preparing cylinders for long-term storage to prevent corrosion.
Tips for storing the tractor indoors, proper covering, and fuel management.
Common causes and corrections for the engine failing to start or starting with difficulty.
Solutions for lack of power, engine not turning over, or clicking sounds during starting.
Troubleshooting steps for persistent power loss and excessive vibration during operation.
Diagnosing issues with uneven cuts, blade rotation, and safety interlock system faults.
Solutions for problems related to mower blade rotation and poor grass discharge performance.
Troubleshooting for headlights, battery charging, loss of drive, and engine backfiring.
A detailed diagram illustrating the tractor's electrical system components and their wiring.
An exploded view diagram showing electrical components with corresponding part numbers.
A list of electrical part numbers and their descriptions for easy identification and ordering.
An exploded view diagram illustrating the tractor's chassis and enclosure components.
A list of part numbers and descriptions for chassis and enclosure components.
An exploded view diagram of the tractor's ground drive system components.
A list of part numbers and descriptions for the ground drive system components.
An exploded view diagram showing the components of the tractor's steering assembly.
A list of part numbers and descriptions for the steering assembly components.
An exploded view diagram illustrating the tractor's engine components.
A list of part numbers and descriptions for the engine components.
An exploded view diagram showing the components of the tractor's seat assembly.
Information and diagrams showing the location and identification of various decals on the tractor.
A list and diagrams of parts related to the tractor's wheels and tires.
An exploded view diagram illustrating the tractor's lift assembly components.
A list of part numbers and descriptions for the lift assembly components.
An exploded view diagram of the mower deck components for identification.
A list of part numbers and descriptions for the mower deck components.
An exploded view diagram of the Hydro Gear transaxle components.
A list of part numbers and descriptions for the Hydro Gear transaxle.
An exploded view diagram showing the components of the Briggs & Stratton engine.
Details on the parts included in carburetor and gasket kits for the engine.
Visual diagrams illustrating various sub-assemblies of the Briggs & Stratton engine.
A comprehensive list of part numbers and descriptions for Briggs & Stratton engine components.
Lists engine part numbers and specifies recommended RPM settings for operation.
Provides general information and recommendations for servicing the tractor.
Offers further notes and considerations relevant to tractor service and maintenance.
A visual guide and instructions for safely operating the tractor on slopes up to 15 degrees.
