Do you have a question about the Craftsman 917.273392 and is the answer not in the manual?
Engine | Briggs & Stratton |
---|---|
Engine Displacement | 190cc |
Drive Type | Self-Propelled |
Cutting Positions | 6 |
Oil Capacity | 20 oz |
Wheel Size (Front) | 8 inches |
Wheel Size (Rear) | 11 inches |
Engine Power | 6.75 ft-lbs Torque |
Cutting Height | 1.25 to 3.75 inches |
Drive System | Rear Wheel Drive |
Covers repair or replacement of defective parts for two years, with labor provided.
Covers defective batteries for ninety days, with options for in-home service.
Instructions for safe operation, including clearing areas, adult supervision, and avoiding hazards.
Guidelines for operating safely on slopes to prevent tipovers and loss of control.
Precautions regarding children's safety around the machine and during operation.
Safety measures for handling fuel, maintenance, and general servicing of the equipment.
Lists required tools and outlines steps for assembling steering and seat components.
Instructions on how to unpack and remove the tractor from its shipping carton.
Steps for checking the battery and safely removing the tractor from its skid.
Checklist for ensuring all assembly steps are completed and safety checks are performed.
Explains the meaning of various symbols that may appear on the tractor or in literature.
Defines hazard alert symbols like DANGER, WARNING, CAUTION, and FIRE.
Identifies and explains the function of major controls and adjustments on the tractor.
Instructions on setting the parking brake and using the throttle control for operation.
Guidance on moving the tractor forward/backward and adjusting the mower cutting height.
Procedures for operating the mower and crucial safety guidelines for mowing on hills.
Steps for transporting the tractor and essential checks before starting the engine.
Instructions for adding gasoline and starting the engine in various weather conditions.
General advice on maintaining the tractor and following warranty requirements.
A checklist of essential inspections to perform before operating the tractor.
Procedures for checking brake operation, tire pressure, and operator presence systems.
Guidelines for caring for mower blades, including removal, sharpening, and balancing.
Instructions for battery maintenance, cleaning terminals, and ensuring transaxle cooling.
Details on engine oil type, changing oil, and checking oil levels based on temperature.
Procedures for cleaning and maintaining the air filter, air screen, and engine cooling system.
Guidance on inspecting the muffler, replacing spark plugs, and replacing the in-line fuel filter.
Safety precautions before servicing and steps for removing the mower deck from the tractor.
Instructions for reinstalling the mower deck and general cleaning of the tractor.
Procedures for adjusting the mower deck for optimal side-to-side and front-to-back leveling.
Instructions for replacing mower drive and motion drive belts, and adjusting the brake system.
Adjustments for transaxle, steering alignment, and starting with a weak battery.
Steps for replacing the battery, checking wiring, and replacing fuses.
Procedures for adjusting the throttle control cable and the engine carburetor.
Instructions for preparing the tractor, battery, and fuel system for storage.
Solutions for problems like the engine not starting or not turning over.
Troubleshooting steps for loss of power, excessive vibration, and uneven cutting.
Solutions for mower blade rotation, poor grass discharge, lighting, and battery charging problems.