To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 917.276620 and is the answer not in the manual?
General| Model Number | 917.276620 |
|---|---|
| Category | Lawn Mower |
| Engine Type | 4-Cycle |
| Engine | Briggs & Stratton |
| Engine Power | 6.75 HP |
| Engine Displacement | 190cc |
| Cutting Width | 22 inches |
| Cutting Positions | 6 |
| Drive Type | Self-Propelled |
| Drive System | Rear-Wheel Drive |
| Oil Capacity | 20 oz |
| Weight | 85 lbs |
| Wheel Size (Front) | 8 inches |
| Mulching Capability | Yes |
| Bagging Capability | Yes |
| Side Discharge Capability | Yes |
| Type | Walk-Behind |
| Cutting Height Adjustment | Single-lever |
Outlines the warranty terms for the tractor and its battery.
Precautions for slopes, children, towing, and gasoline handling.
Owner duties and information on optional service agreements.
Steps for unpacking, battery check, seat adjustment, and skid removal.
Procedures for driving off skid and essential pre-operation checks.
Identifies tractor symbols and explains hazard alert meanings.
Identifies and explains the function of each tractor control.
How to set the brake, stop the tractor, and use the throttle.
Controlling movement, adjusting cutting height, and operating the mower.
Using ROS, operating on hills, and transporting the tractor.
Adding gasoline and starting the engine in warm conditions.
Starting in cold weather and warming up the transmission.
Maintenance tasks and daily checks for the tractor.
Verifying key systems like brakes, tires, ROS, blades, and battery.
Cleaning battery, checking transaxle, and changing engine oil.
Instructions for servicing the air and fuel filters.
Cleaning the tractor and detaching the mower deck.
Procedures for attaching the mower deck to the tractor.
Adjusting mower deck for optimal cutting performance.
Steps for replacing mower and motion drive belts.
Checking brakes and troubleshooting weak batteries or wheel issues.
Procedures for battery replacement, headlights, fuses, and hood.
Adjusting throttle cable and carburetor for engine performance.
Preparing the tractor, battery, and engine for long-term storage.
Addressing vibration, reverse operation, and uneven cutting issues.
Solutions for mower rotation, electrical, and drive system issues.
