To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 917.293472 and is the answer not in the manual?
Details the warranty terms and conditions for the Craftsman Tiller.
Instructions for safe operation, familiarization with controls, and emergency procedures.
Steps to take before operating the tiller, including area inspection and hazard removal.
Guidelines for safe operation, including handling controls, avoiding hazards, and environmental warnings.
Procedures for keeping the tiller in safe working condition and proper storage methods.
Lists necessary tools for assembling the tiller, including wrench sizes and other equipment.
Defines the reference point for 'left' and 'right' when operating the tiller for clarity.
Details the components included in the tiller's hardware pack with part numbers and quantities.
Steps for safely removing the tiller and its parts from the shipping carton, including caution for staples.
Step-by-step guide for attaching and securely fastening the tiller's handle assembly.
Instructions for connecting the shift rod to the shift lever indicator for proper gear selection.
Procedures for safely extracting the tiller from its packaging after initial unpacking.
Guidance on setting the correct tire pressure for optimal performance and safe operation.
Information on adjusting the tiller's handle height to suit operator preference and conditions.
Familiarizes the operator with the tiller's components, controls, and their functions.
Procedures for safely stopping the tiller's tines and shutting down the engine.
How to engage and disengage the tines and wheels for different operational modes.
Detailed steps on how to perform tilling, including depth adjustment, throttle control, and technique.
Instructions for safely maneuvering the tiller during turns, including handle and depth stake adjustments.
Steps for preparing and safely transporting the tiller, including cooling and fuel draining.
How to move the tiller for short distances on property, with tines raised.
Guidance for transporting the tiller on public roads or paths, requiring fuel draining.
Essential checks and preparations before attempting to start the engine, including fuel and oil.
Procedure for verifying the engine oil level before operation to prevent damage.
How to use the tiller for cultivating, weed destruction, and improving soil moisture retention.
Steps to adjust wheel position outward for increased stability during cultivating operations.
Information about tine shear pins, their protective function, and replacement procedures.
Advice on maintaining the tiller for warranty coverage and longevity, including periodic checks.
Daily checks to perform before operating the tiller, ensuring readiness and safety.
Guidance on keeping the unit well lubricated as per the lubrication chart for smooth operation.
Details on selecting and changing engine oil based on temperature and usage hours for engine health.
Instructions for cleaning and servicing the engine's air filter (pre-cleaner and cartridge) for proper function.
Tips for keeping the air-cooled engine clean by cleaning air screens and fins for longevity.
Precautions regarding the muffler and spark arrester screen, and their maintenance.
Recommendations for replacing the spark plug at the start of a season or after specific hours.
Maintenance for the transmission, including lubrication of the gear case fitting.
Guidelines for cleaning the tiller safely, avoiding pressurized water on sensitive components.
Step-by-step guide to adjust the tiller's handle height to suit operator preference and tilling conditions.
Recommendations for maintaining tire pressure and preventing damage from fuel or oil.
Instructions for safely removing a wheel from the tiller for maintenance or repair.
Steps for removing the belt guard to access the drive belt for maintenance.
Procedures for replacing the ground drive belt, including removing and installing it.
How to adjust the tension of the ground drive belt using the extension spring for proper engagement.
Steps to adjust the throttle control cable for proper engine speed, ensuring it reaches the high-speed stop.
Guidance on when and how to adjust the carburetor, with warnings about the governor.
Steps for cleaning, inspecting, and securing the tiller before storage to prevent rust and damage.
Critical steps to prepare the fuel system for storage, preventing gumming and potential damage from fuel.
Instructions for draining and replacing engine oil for storage to protect internal engine parts.
Steps to protect the cylinder during storage by adding oil and replacing the spark plug.
Additional storage tips, including fuel shelf-life, gasoline can care, and indoor storage recommendations.
Causes and corrections for the engine overheating, including oil level and air screen checks.
Reasons for excessive bounce and difficult handling, and how to correct them by adjusting conditions.
Causes and solutions for soil clumping during tilling, often related to moisture content.
Troubleshooting steps when the engine runs but the tiller's drive system fails to engage.
Causes and solutions for the engine laboring during tilling, related to depth, throttle, or carburetor.
Reasons why tines might skip over the ground, often due to shear pin failure or improper settings.
Troubleshooting for difficulty shifting gears, possibly due to gear meshing or jammed tines.
Causes and solutions when the tiller shuts off upon engaging the drive control bar, possibly due to jammed tines.
General