To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 917.294484 and is the answer not in the manual?
General| Manufacturer | Craftsman |
|---|---|
| Model Number | 917.294484 |
| Engine | Briggs & Stratton |
| Engine Type | 4-Cycle |
| Engine Power | 6.5 HP |
| Tilling Depth | 6 inches |
| Tine Rotation | Counter-Rotating |
| Forward Speeds | 1 |
| Reverse Speeds | 1 |
| Wheel Size | 13 inches |
| Fuel Capacity | 3 quarts |
| Type | Rear-Tine Tiller |
Details the terms and coverage of the limited two-year warranty for the Craftsman Tiller.
Covers essential safety practices, training, and preparation steps before operating the tiller.
Outlines safe operating procedures, handling of foreign objects, and equipment checks.
Advises on keeping the machine in safe working condition and proper storage procedures.
Specifies fuel type, oil type, and capacities required for the tiller.
Details the benefits and availability of Sears repair protection agreements.
Lists optional accessories available for the tiller.
Identifies the components included in the hardware pack for assembly.
Lists required tools and initial steps for unpacking and assembling the tiller.
Provides instructions for installing and adjusting the tiller's handle assembly.
Introduces tiller controls and symbols, including drive bar, depth stake, and throttle.
Details how to operate the tiller, stop it, and adjust depth stake for tilling.
Explains how to turn the tiller and adjust outer side shields for tilling depth.
Provides instructions for transporting the tiller around the yard or town.
Covers checking engine oil level and adding gasoline, with important safety precautions.
Step-by-step guide on how to start the tiller's engine, including choke usage.
Offers advice on tilling depth, soil conditions, and efficient tilling passes.
Explains cultivating, adjusting wheels for it, and tine shear pins.
Describes the purpose of shear pins and when to replace them.
Guidelines for checking tine sharpness, wear, and replacing worn or damaged tines.
Outlines a maintenance schedule and provides a lubrication chart for the tiller.
Discusses warranty conditions, recommends annual checks, and lists pre-use checks.
Details oil selection, change intervals, and air filter maintenance procedures.
Covers engine cooling, muffler care, and transmission lubrication.
Instructions on how to adjust the tiller's handle height for operator comfort.
Advises on tire pressure, wheel removal, belt guard, and drive belt replacement.
Instructions for adjusting the throttle control cable and carburetor, with safety warnings.
Comprehensive guide on preparing the tiller and engine for long-term storage.
Lists common problems like 'Will not start', 'Hard to start', and 'Loss of power' with causes and corrections.
Addresses issues like engine overheating, handling difficulties, and drive system problems.
Provides a detailed parts list and diagram for the tiller's handle assembly.
Lists components for the mainframe, transmission, and tine assemblies.
Provides diagrams and lists for engine components, gaskets, and labels.
