To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 917.378200 and is the answer not in the manual?
General| Engine Type | 4-cycle |
|---|---|
| Engine | Briggs & Stratton |
| Engine Power | 6.75 HP |
| Displacement | 190cc |
| Cutting Width | 22 inches |
| Deck Material | Steel |
| Oil Capacity | 20 oz |
| Starter Type | Recoil |
| Drive System | Rear Wheel Drive |
| Wheel Size | 8 inches (front), 11 inches (rear) |
| Fuel Tank Capacity | 1.6 quarts |
Details the terms and conditions of the 2-year limited warranty against defects in material or workmanship.
Warns of hot engine parts, chemical exposure (Prop 65), and spark arrester requirements for operation.
Emphasizes critical child safety risks and recommends an age for operating the mower.
Stresses reading the manual, understanding controls, and ensuring familiarity before operating.
Advises on clearing the area, ensuring clear of people, proper footwear, and safe backward movement.
Covers mowing in daylight, dry conditions, never leaving unattended, and inspecting for damage.
Provides 'DO' and 'DO NOT' advice for safe mowing on slopes to prevent slips and falls.
Details safe practices for handling gasoline, including fueling, storage, and spill prevention.
Outlines general service advice, including tightening fasteners, checking safety devices, and cleaning.
Advises on checking grass catcher components, handling sharp blades, and not tampering with engine governor.
Explains the advantages of purchasing a repair protection agreement for service and parts.
Lists various accessories that were available for the lawn mower, but not shipped with it.
Provides steps for safely removing the lawn mower from its shipping carton.
Details how to unfold and adjust the lawn mower handle for proper operation and comfort.
Explains how engine power ratings are determined and factors affecting actual power output.
Guides on how to properly assemble the grass catcher frame and bag.
Provides steps for installing the starter rope on models equipped with a T-knob.
Refers to the Operation section for converting the mower to bagging or discharging.
Identifies and explains the function of major parts like the operator presence control bar and drive levers.
Highlights CPSC safety compliance and explains operational symbols found on the mower.
Discusses fixed engine speed, the operator presence control bar, and engine zone control requirements.
Explains how to engage the self-propelling drive and adjust its speed using the control system.
Provides instructions on how to adjust the lawn mower's cutting height using the single lever.
Details steps for converting the mower for Rear Bagging, Mulching, or Side Discharging operations.
Guides on checking and adding the correct type and amount of oil and gasoline before starting.
Provides instructions for safely starting and stopping the lawn mower engine.
Offers tips on cutting conditions, blade use, side discharge, and maintaining the mower's exterior.
Provides guidance on mulching, including blade speed, cutting wet grass, and adjusting height for optimal results.
Lists recommended maintenance checks and tasks with their corresponding frequencies (daily, 10 hrs, 25 hrs, etc.).
Discusses warranty terms and the need for periodic adjustments to maintain the unit.
Covers lubrication points and essential checks to perform before each use of the mower.
Provides advice on keeping tires free of chemicals and checking drive wheels for proper movement.
Details the procedure for safely removing, replacing, and installing the mower blade.
Explains how to sharpen and balance the mower blade for optimal performance and to prevent damage.
Advises on cleaning the grass catcher and maintaining the gear case area for proper function.
Details engine oil requirements, viscosity grades, and step-by-step instructions for changing the oil.
Explains the importance of the air filter and provides instructions for cleaning or replacing it.
Advises on inspecting the muffler and replacing the spark plug at scheduled intervals.
Provides guidance on cleaning the mower's exterior and underside after use.
Explains how to use the water washout fitting for easy cleaning of the mower's underside.
Details how to adjust the lawn mower's cutting height using the single lever mechanism.
Provides instructions for removing and replacing the drive belt, including necessary precautions.
Explains how to adjust the lawn mower handle to multiple height positions for operator comfort.
