To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 917.378493 and is the answer not in the manual?
General| Engine Brand | Briggs & Stratton |
|---|---|
| Engine Displacement | 190cc |
| Cutting Width | 22 inches |
| Drive Type | Self-Propelled |
| Cutting Height Positions | 6 |
| Speed Settings | Variable |
| Wheel Size (Front) | 8 inches |
| Wheel Size (Rear) | 11 inches |
| Engine Type | 4-Cycle |
| Fuel Capacity | 1.6 quarts |
| Engine Power | 5.5 ft-lbs Torque |
| Cutting Height | 1.25 - 3.75 in. |
| Drive System | Rear-wheel drive |
| Fuel Tank Capacity | 1.6 quarts |
Important safety instructions and warnings.
Read, understand, and follow all instructions.
Keep children out of area and be alert.
Instructions for unpacking, setup, and handle folding.
Familiarize with controls, adjustments, and symbols.
Operate engine speed, zone control, and drive.
Check oil and add gasoline.
Start cold/warm engine using primer and starter.
Recommended service intervals.
Where and how to lubricate.
Causes and corrections for engine not starting.
Solutions for power loss, uneven cut, vibration.
Troubleshoot starter rope, catcher, drive.
