To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 917.388340 and is the answer not in the manual?
General| Engine Type | 4-cycle |
|---|---|
| Engine Power | 6.75 hp |
| Engine Displacement | 190 cc |
| Deck Material | Steel |
| Start Type | Pull Start |
| Cutting Height | 1.25 to 3.75 inches |
| Cutting Positions | 6 |
| Oil Capacity | 20 oz |
| Mulching Capability | Yes |
| Bagging Capability | Yes |
| Side Discharge Capability | Yes |
| Cutting Width | 21 in |
| Drive System | Rear-wheel drive |
| Speed | Variable |
| Wheel Size | 8 in (front), 11 in (rear) |
Details the terms and conditions of the limited two-year warranty for the Craftsman lawn mower.
Guidelines for safe operation, including reading the manual, understanding controls, and pre-operation checks.
Essential checks before starting the engine, including fuel, oil, and safe mowing practices.
Regular checks for loose fasteners, safety devices, and guidelines for storing the mower.
Optional accessories for performance and parts for maintenance, such as filters and oil.
Instructions for safely removing the lawn mower from its shipping carton.
Steps to unfold handles and convert the mower for mulching, bagging, or discharging.
Identification and explanation of symbols and controls like the operator presence bar and primer.
Guidance on engine speed, adjusting cutting height, and using the grass catcher.
Procedure for checking and filling engine oil and adding gasoline.
Steps for priming the engine and pulling the starter handle to start it.
Advice for mowing tall grass, wet grass, and managing clippings effectively.
Tips for effective mulching, including blade speed, cutting height, and pattern.
Table detailing service tasks by interval and guidance on lubrication points.
Specifications for gasoline capacity, oil type, spark plug gap, and blade bolt torque.
Instructions for keeping the blade sharp and how to remove and replace it.
Detailed steps on how to sharpen and balance the mower blade.
Procedures for changing engine oil and maintaining the grass catcher.
Instructions for changing the air filter and spark plug for engine performance.
Importance of inspecting the muffler and cleaning the mower housing and underside.
Steps to adjust the cutting height and handle position for optimal use.
Steps for cleaning, lubricating, and securing the mower for storage.
Guidance on draining fuel or using stabilizer to prevent fuel system issues during storage.
Diagnosing issues like no start, loss of power due to fuel, air filter, or spark plug.
Addressing problems like uneven cuts, excessive vibration, and walking speed.
Solutions for excessive vibration, hard-to-pull starter rope, and grass catcher filling.
Addressing issues like grass too high, mower dragging, or improper handle height.
An exploded view diagram of the lawn mower showing all major components.
A detailed list of all parts with corresponding key numbers for ordering replacements.
Diagram showing major components of the Craftsman 4-cycle engine.
Detailed list of engine parts with key numbers and descriptions.
Diagram of the carburetor assembly with part numbers.
Detailed list of carburetor parts with key numbers and descriptions.
Diagram of the rewind starter assembly with part numbers.
Detailed list of rewind starter parts with key numbers and descriptions.
