To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 987.799600 and is the answer not in the manual?
General| Engine Brand | Briggs & Stratton |
|---|---|
| Engine Torque | 8.5 ft-lbs |
| Chipper Capacity | 3 inches |
| Engine Type | 4-Cycle OHV |
| Wheel Size | 12 inches |
Learn how to use the equipment safely and effectively, covering controls and proper use.
Steps to take before operating the equipment, including safety gear and checks.
Locate and maintain all safety decals on the equipment for proper warnings.
Owner's duties for maintenance, storage, and safe operation of the equipment.
Guide to positioning and securing the handlebars for operation.
Instructions for attaching or detaching the collection bag for operation.
Procedure for adding the correct type and amount of oil to the engine.
Ensure all fasteners are secure after assembly for safe operation.
Identification and description of key features and controls on the Chipper/Vac machine.
Steps for adding fuel, pre-starting checks, starting, and stopping the engine.
Explanation of how the machine operates for optimal use.
How to use the machine for vacuuming leaves and debris.
Instructions for feeding branches into the chipper chute.
Chart detailing suitable materials for vacuuming and chipping.
List of items that should not be processed by the Chipper/Vac.
Steps for operating the machine in walk-behind vacuuming mode.
Practical advice for efficient and safe walk-behind vacuuming.
Instructions for using the optional vacuum hose attachment.
How to set up and use the machine for blowing debris.
Detailed guide on feeding materials into the chipper chute.
Steps to safely resolve jams or clogs during operation.
Guidance on essential maintenance for optimal performance and longevity.
Procedures for checking and changing the engine oil level.
Instructions for cleaning or replacing the air cleaner element.
Maintenance for the spark arrester screen assembly.
How to check, gap, and replace the spark plug.
Steps to inspect the spark plug's condition and gap.
Notes on carburetor settings and the engine's ignition system.
Guide on sharpening or replacing the chipper blade for efficiency.
Information regarding lubrication of machine parts.
Detailed steps for safely removing and installing the chipper blade.
Chart listing torque values for various bolts and screws.
Procedures for preparing the machine for long-term storage.
