To Next PageTo Next Page
Need help?Do you have a question about the Craftsman CMCMW260P1 and is the answer not in the manual?
General| Type | Cordless Electric Lawn Mower |
|---|---|
| Motor | Brushless |
| Run Time | Up to 60 minutes |
| Deck Material | Steel |
| Drive Type | Push |
| Cutting Height Positions | 6 |
| Speed Settings | Single Speed |
| Mulching Capability | Yes |
| Bagging Capability | Yes |
| Side Discharge Capability | Yes |
| Battery | Lithium-Ion |
| Wheel Size | 8 inches front / 10 inches rear |
| Starter Type | Push Button |
| Cutting Height | 1.5 - 4 inches |
Imminent hazard, results in death or serious injury if not avoided.
Potentially hazardous situation, results in death or serious injury if not avoided.
Potentially hazardous situation, results in minor/moderate injury if not avoided.
Practice not related to personal injury, may result in property damage if not avoided.
Covers safe operation, maintenance, environment, and handling hazards.
Highlights risks of amputating hands/feet and throwing objects.
Operator training, manual understanding, and sobriety.
Area clearing, safety device checks, and protective equipment.
Daylight operation, hazard avoidance, and blade safety.
Specific safety measures for children and slopes.
Basic maintenance and chemical exposure warnings.
Safe charging, storage, and handling procedures for battery packs.
Safe usage, environmental considerations, and charger handling.
Precautions for safely carrying battery packs.
Guidelines for safe use of extension cords with chargers.
Step-by-step guide for charging the battery pack.
Tips for optimal battery life and charging conditions.
Guide to set up the handle for operation.
Instructions for attaching the side discharge.
Steps for battery insertion and removal.
How to use the safety key and start the mower.
Preventing overload, folding for storage, and cutting advice.
Instructions for lifting, carrying, and storing the mower.
Advice for efficient mowing, including on slopes.
Basic cleaning after use and checking fasteners.
Steps for blade removal and installation.
Instructions for sharpening and balancing the blade.
Information on lubrication and cleaning procedures.
How to prevent corrosion and meet safety standards.
Information on recommended accessories, repairs, and warranty.
Troubleshooting steps for operational issues.
