Craftsman CMXEVBCV1260L User Manual

ENGLISH
Fig. 22
8
LUBRICATION
39. No lubrication is necessary as the motor is equipped with
lifetime lubricated bearings.
TOOL STORAGE
40. Set tank cover onto the tank. Position back of tank facing
you.
41. Take tool holder
18
and slide over notches located on
rear of tank. Fig. 17.
HOSE STRAP
10
42. Wrap hose strap
19
.Fig. 18 around hose
12
aligning
raised areas on back of strap
19
into a groove on hose
12
. Fig. 19.
43. Insert button #1 into button hole #1 Fig. 19 (this may be
difficult at first), continue to wrap hose strap
19
around
hose
12
Fig. 20. Insert button #2 into button hole #2
Fig. 21.
44. Place vacuum tools in tool holder
18
. Fig. 22. The
vacuum should be stored indoors.
Register Online
Thank you for your purchase. Register your product nowfor:
• WARRANTY SERVICE: Registering your product will
help you obtain more efficient warranty service in case
there is a problem with yourproduct.
• CONFIRMATION OF OWNERSHIP: In case of
an insurance loss, such as fire, flood or theft, your
registration of ownership will serve as your proof
ofpurchase.
• FOR YOUR SAFETY: Registering your product will
allow us to contact you in the unlikely event a safety
notification is required under the Federal Consumer
SafetyAct.
Register online at www.craftsman.com/registration
Fig. 17
Fig. 19
Fig. 20
Fig. 21
Fig. 18
Button hole #2
Button hole #1
Raised area
(fits in groove of hose to
prevent it from slipping)
Button hole #2
Button hole #1
Button #2
Button #1

Craftsman CMXEVBCV1260L Specifications

General

Brand	Craftsman
Model	CMXEVBCV1260L
Category	Vacuum Cleaner
Language	English