To Next PageTo Next Page
Need help?Do you have a question about the Craftsman EZ3 917.387070 and is the answer not in the manual?
General| Model Number | 917.387070 |
|---|---|
| Engine | Briggs & Stratton |
| Engine Displacement | 190cc |
| Cutting Height | 1.25 - 3.75 inches |
| Cutting Height Positions | 6 |
| Oil Capacity | 20 oz |
| Engine Type | 4-Cycle |
| Drive System | Rear-wheel drive |
| Warranty | 2 year limited |
Details the terms and conditions of the warranty coverage for the lawn mower.
Emphasizes proper manual reading, control familiarization, and safe operation practices.
Covers pre-operation checks, clearing the area, and appropriate attire for safe mowing.
Instructions on mowing techniques, handling slopes, and maintaining focus during operation.
Guidance on regular checks, cleaning, and proper storage procedures for the mower.
Lists optional attachments for improving mower performance and functionality.
Lists optional parts and supplies for maintaining the lawn mower.
Step-by-step instructions for assembling the lawn mower after unpacking.
Detailed process for unfolding and securing the mower's handle for use.
Familiarize with mower controls, adjustments, and safety symbols before operation.
Details how the mower meets Consumer Product Safety Commission standards.
Adjusting engine speed and understanding the operator presence control for safety.
Guide on how to set the mower's cutting height for desired grass length.
Instructions for attaching the deflector for side discharge operation.
Instructions on checking, filling, and changing engine oil and fueling the mower.
Steps for starting the engine and advice on mowing tall grass and heavy cutting.
How to achieve optimal mulching performance, grass dispersal, and lawn health.
Tips on avoiding wet grass, changing cutting patterns, and adjusting height for mulching.
Outlines owner's duties and provides a chart for regular service tasks and their frequency.
Advice on adjustments, part replacements, and proper lubrication of mower components.
Location of model/serial numbers and key technical details like horsepower and oil capacity.
Guidance on keeping the mower blade sharp, balanced, and instructions for its removal and installation.
Specifies recommended oil types and steps for changing engine oil.
Instructions for changing the air filter element for optimal engine performance.
Guidance on inspecting the muffler and replacing the spark plug annually.
Tips for cleaning the mower housing and engine to ensure proper function.
Critical safety steps before performing any service or adjustment on the mower.
How to adjust the mower handle to different height positions for operator comfort.
Details on the fixed carburetor and factory-set engine speed with adjustment warnings.
Steps for cleaning, lubricating, and securing the mower before storage.
Instructions on how to fold the handle for easier storage or transportation.
Importance of preventing gum deposits and using fresh fuel, especially during storage.
Procedure for adding oil to the cylinder before storing the engine.
Lists common causes and corrections for the engine failing to start.
Addresses loss of power, uneven cut, and excessive vibration causes and solutions.
Troubleshooting steps for a starter rope that is difficult to pull and catcher effectiveness.
Reasons for the mower being hard to push and how to adjust handle height.
Diagram showing all parts of the rotary lawn mower with corresponding key numbers.
Contact information for ordering parts, scheduling repairs, and locating service centers.
Details on purchasing or inquiring about Sears Maintenance Agreements.
Information required when requesting service or ordering replacement parts.
