To Next PageTo Next Page
Need help?Do you have a question about the Craftsman INCREDI.PULL 316.299371 and is the answer not in the manual?
Warning about chemicals in engine exhaust known to cause cancer, birth defects, or reproductive harm.
Explanation of safety symbols like SAFETY ALERT, DANGER, WARNING, CAUTION, and NOTE.
Key safety rules for operating the unit, covering general use, personal protection, and environmental conditions.
Precautions regarding gasoline's flammability and explosion risk, including fueling and storage.
Additional safety guidelines covering storage, handling, and general precautions for operation.
Indicates danger, warning or caution; read manual for details.
Warning to wear eye and hearing protection when operating.
Indicates the use of clean, fresh, unleaded fuel.
Symbols for the engine's ON/START/RUN and OFF/STOP controls.
Warning against using E85 fuel which can damage the engine.
Caution that rotating cutters can propel objects, causing injury.
Instruction to keep bystanders, especially children, away from the operating area.
Warning not to touch hot engine parts that can cause severe burns.
Refers to operator's manual for proper type of oil.
Illustrates the primer bulb and its function.
Warning that rotating tines can cause severe injury; stop engine before maintenance.
Steps to adjust and secure the cultivator's handlebars for proper operation.
Procedure to adjust the wheel support bracket for desired tine depth.
Specifies the required SAE 30 weight oil and its API service class for the crankcase.
Detailed steps for adding oil to the crankcase before the first use.
Guidance on using fresh, clean, unleaded gasoline and avoiding old or contaminated fuel.
Explains that fuels may be blends with ethanol, methanol, or MTBE, and their effects.
Precautions and recommendations for using blended fuels, including STA-BIL®.
Information on using fuel additives like STA-BIL® to prevent corrosion and gum deposits.
Safety warnings and instructions for filling the fuel tank, including cap removal and spill prevention.
Step-by-step guide to start the cultivator engine, including checks and lever adjustments.
Instructions for starting the unit using optional Plug-In Power Start or Power Bit Start accessories.
How to operate the cultivator, including starting, lowering tines, and maintaining control.
Recommendations for safe and effective operation, such as carrying and transport.
Procedure to safely stop the cultivator engine by releasing the throttle and using the control.
Safety precautions and steps for safely moving the cultivator from one location to another.
Procedure to clean the air filter every 10 hours of operation for optimal performance.
Instructions for changing the engine oil, including initial change and regular intervals.
Procedure to check and adjust valve clearance at specified intervals.
Guide to inspecting and adjusting the spark plug gap for proper ignition.
Procedure to check the spark arrestor for proper function.
Steps for removing and replacing cultivator tines, emphasizing simultaneous replacement.
Detailed instructions on how to check the engine oil level before each use.
Step-by-step guide for draining and refilling the engine oil.
Procedure for cleaning and re-oiling the air filter for optimal engine performance.
Procedure for checking and adjusting valve clearance for engine tuning.
Steps to remove, clean, and reinstall the spark arrestor screen and cover.
Detailed steps for preparing the unit for extended storage, including draining fuel and oil.
Common causes and solutions for the engine failing to start.
Troubleshooting steps for when the engine does not idle properly.
Solutions for issues where the engine fails to accelerate correctly.
Diagnosing and fixing problems related to loss of engine power or stalling.
Technical details of the engine, including type, displacement, RPM, and ignition.
Technical details of the cultivator, including path width, depth, and weight.
General