To Next PageTo Next PageWhy does my Craftsman Trimmer lack power or stall?
If your Craftsman Trimmer engine lacks power or stalls, the issue might stem from old fuel (over 30 days); in that case, drain the fuel tank and add fresh fuel. A dirty air filter can also cause this, so clean or replace it. Lastly, a fouled spark plug could be the reason, so replace the spark plug.
Why won't my Craftsman WEEDWACKER 316.73193 engine idle?
If your Craftsman Trimmer engine won't idle, it might be due to a dirty air filter, so clean or replace it. Old fuel (over 30 days) can also cause this issue, so drain the fuel tank and add fresh fuel. Additionally, the idle speed may be incorrect, so adjust it accordingly.
What to do if my Craftsman WEEDWACKER 316.73193 Trimmer engine will not accelerate?
If your Craftsman Trimmer engine will not accelerate, it could be due to old fuel (over 30 days), so drain the fuel tank and add fresh fuel. Another potential cause is a cutting head bound with grass; stop the engine and clean the cutting head. A dirty air filter can also prevent acceleration, so clean or replace the air filter.
Emphasizes the importance of reading and following all safety instructions before using the unit.
Provides critical warnings for safe operation, including fatigue, children, guards, inspection, and line types.
Details specific safety precautions related to gasoline, flammability, and storage.
Outlines essential practices for safe operation, including protective gear, handling, and unit positioning.
Stresses the importance of maintaining the unit with care and regular service.
Directs non-manual maintenance to qualified service dealers for proper service.
Details safe storage practices, proper cleaning methods, and secure handling during transport.
Indicates danger, warning or caution. May be used with other symbols.
WARNING: Read the manual and follow all safety instructions. Failure to do so can result in serious injury.
WARNING: Thrown objects and loud noise can cause severe injury. Wear protective gear.
Always wear heavy-duty, non-slip footwear when operating this unit.
Lists common applications for the trimmer, such as cutting grass, edging, and decorative trimming.
Specifies the tools needed for unit assembly: Phillips screwdriver and Torx screwdriver.
Details technical specifications including engine type, displacement, spark plug, and dimensions.
Provides step-by-step instructions for securely installing the cutting head shield for safety.
Guides on how to attach and position the handle assembly for comfortable operation.
Details the process of securing the front and rear handle brackets with bolts and nuts.
Explains how to adjust the handle's position and tilt for comfortable operator use.
Step-by-step guide to securely attach optional accessories to the unit's coupler.
Procedure for safely detaching accessories from the unit's coupler.
Instructions for fitting and adjusting the shoulder strap for operator comfort.
Specifies the type of oil (SAE 30) and warns against using dirty oil for engine longevity.
Details the procedure for adding oil to the crankcase before initial use, with a warning about overfilling.
Recommends fresh, clean unleaded gasoline and defines blended fuels.
Critical warning against using E85 fuel due to potential engine damage and warranty voidance.
Provides critical safety warnings regarding gasoline flammability and proper fueling procedures.
Step-by-step instructions for filling the fuel tank safely and correctly.
Detailed steps for starting the engine, including primer, throttle, and rope pull.
Procedure for safely stopping the engine by releasing the throttle and using the on/off switch.
Lists available Speed Start accessory item numbers and descriptions.
Explains how to start the unit using the optional Speed Start accessory.
Procedure for safely stopping the engine, applicable with or without the accessory.
Guidance on the correct posture and hand grip for stable and safe operation.
Tips for efficient cutting, including cutting direction and avoiding wet grass.
Specific technique for decorative trimming around objects using a 30° cutting head angle.
Instructions on rotating the attachment for edging, including coupler use.
Warning about using the 90° edging hole only with the trimmer attachment to prevent injury.
Tips for maintaining the trimming line during edging, including wear and avoiding force.
Outlines required maintenance tasks at specific hour intervals for optimal unit performance.
Detailed steps for removing old line and installing new trimming line into the cutting head.
Procedure to check the oil level using the sight window for engine protection.
Instructions on how to add oil, including warnings against overfilling the crankcase.
Step-by-step guide for draining warm oil and refilling with fresh oil.
Instructions on cleaning and re-oiling the air filter for proper engine function.
Procedure to adjust the idle speed screw if the engine does not idle properly.
Guide to inspecting, cleaning, gapping, and replacing the spark plug.
Instructions for cleaning the unit's exterior using a brush and soft cloth, avoiding harsh cleaners.
Covers short-term and long-term storage procedures, including fuel removal and engine preparation.
Steps to get the unit ready for operation after extended periods of storage.
Lists common reasons and solutions for an engine that fails to start.
Provides solutions for issues related to the engine not idling correctly.
Addresses problems with acceleration and offers troubleshooting steps.
Offers solutions for power loss or stalling issues, often related to fuel or air filter.
General