EasyManua.ls Logo

Craig CMA3000 - POWER SOURCES; USING BATTERIES; USING AN ADAPTER

Craig CMA3000
7 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2
USING BATTERIES
1. Open the battery
compartment door
on the top of the
unit by pressing
the Battery
Release button.
2. Insert four (4) AA
batteries (not included) according to the polarity diagram
inside the battery compartment. Alkaline batteries are
recommended for the longest playing time.
3. Close the Battery Compartment Door.
USING AN ADAPTER (NOT INCLUDED)
1. Plug the AC adapter into the DC IN jack.
NOTES:
The batteries will be disconnected if using an AC adapter
Only use an AC
adapter with the
following specs:
Output DC 6V,
1A
POWER SOURCES (CONTINUED)
BATTERY PRECAUTIONS
Follow these precautions when using batteries in this device:
1. Use only the size and type of batteries specied.
2. Be sure to follow the correct polarity when installing the batteries as indicated
inside the battery compartment. Reversed batteries may cause damage to the
device.
3. Do not mix different types of batteries together (e.g. Alkaline, Rechargeable and
Carbon-zinc) or old batteries with fresh ones.
4. If the device is not to be used for a long period of time, remove the batteries to
prevent damage or injury from possible battery leakage.
5. Do not try to recharge batteries not intended to be recharged; they can overheat
and rupture. (Follow battery manufacturer’s directions.)
6. Do not dispose of batteries in fire-batteries may explode or leak.
CMA3000_IB_E0OT2_B0CV.qxd 11/23/06 2:37 PM Page 2

Related product manuals