Crate BV412RVB User Manual

1
2
3 4
16 OHMS
MONO
4 OHMS
MONO
OUT IN
RIGHTLEFT
8 OHMS
STEREO
OUT
4 OHM16 OHM
4 OHM16 OHM
16 OHMS
MONO
4 OHMS
MONO
OUT IN
RIGHTLEFT
8 OHMS
STEREO
OUT
16 OHMS
MONO
4 OHMS
MONO
OUT IN
RIGHTLEFT
8 OHMS
STEREO
LEFT OUT RIGHT OUT
Mono Amplifier
4 Ohm Mono Configuration:
16 Ohm Mono Configuration:
8
Ohm Stereo Configuration:
BV412RVB/SVB
Input plate
Mono Amplifier
BV412RVB/SVB
Input plate
Stereo Amplifier
BV215RVD
Input plate
The Input/Output Plate:
(1) Impedance Selector Switch:
Use this switch to select 16 ohm
mono operation or 8 ohm stereo/4
ohm mono operation.
(2) Out 1/4” Jack: When using the
cabinet in the mono operating
mode, use this jack to connect the
cabinet to another speaker enclo-
sure of the same impedance.
(3) In/Left 1/4” Jack: When using
the cabinet in the mono operating
mode, use this jack as the cabinet’s
input jack. Connect the output of
your amplifier to this jack by means
of the 14 gauge speaker cable pro-
vided.
When using the cabinet in the
stereo operating mode, connect this
jack to the left channel output of
your amplifier.
(4) Right 1/4” Jack: When using
the cabinet in the stereo operating
mode, connect this jack to the right
channel output of your amplifier.
When using the cabinet in the mono
operating mode, this jack is not
used.
Refer to the illustrations to the
right for additional information.
BV412RVB/SVB Guitar Enclosure

Crate BV412RVB Specifications

Power Specifications

impedance	4 or 16 ohms Mono, 8 ohms Stereo
RMS power rating	240 watts Mono, 120 watts Stereo
peak power handling	480 watts Mono, 240 watts Stereo

Acoustic Specifications

frequency response	70Hz – 5kHz
sensitivity	100dB SPL 1 watt/1 meter
maximum SPL	120dB

Physical Specifications

transducers	(4) Celestion 12” 16 ohm Vintage 30 speakers
dimensions	31-1/2” x 30” x 14”
weight	BV412SVB: 106 lbs; BV412RVB: 110 lbs