10. LEVEL: Use this control to adjust the output level of Channel 3.
11. GAIN: Use this control to adjust the amount of distortion produced by Channel 3.
12. HIGH: Use this control to adjust the high frequency level of Channel 3.
13. MID: Use this control to adjust the midrange frequency level of Channel 3.
14. LOW: Use this control to adjust the low frequency level of Channel 3.
15. CHANNEL 2 SELECT: This switch, when depressed, selects Channel 2 as the active channel.
The switch illuminates when Channel 2 is active. Channel 2 features a medium gain FlexWave cir-
cuit for moderate distortion and “crunch.”
16. LEVEL: Use this control to adjust the output level of Channel 2.
17. GAIN: Use this control to adjust the amount of distortion produced by Channel 2.
18. HIGH: Use this control to adjust the high frequency level of Channel 2.
19. MID: Use this control to adjust the midrange frequency level of Channel 2.
20. LOW: Use this control to adjust the low frequency level of Channel 2.
21. CHANNEL 1 SELECT: This switch, when depressed, selects Channel 1 as the active channel.
The switch illuminates when Channel 1 is active. Channel 1 features a low gain FlexWave circuit for
clean sounds or sounds with mild distortion.
22. LEVEL: Use this control to adjust the output level of Channel 1.
23. GAIN: Use this control to adjust the amount of distortion produced by Channel 1.
24. HIGH: Use this control to adjust the high frequency level of Channel 1.
25. MID: Use this control to adjust the midrange frequency level of Channel 1.
26. LOW: Use this control to adjust the low frequency level of Channel 1.
27. INPUT: Use this jack to connect your guitar to the amplifier by means of a shielded instru-
ment cable.
To Next Page
Loading...
Need help?
General
